Ynys Fach (SN 668 951)
There has been a Significant Height Revision to a hill that is listed in the 30-99m Twmpau and Y Trechol – The Dominant Hills of Wales, with the summit height, bwlch height and their locations, the drop, dominance and status of the hill derived by Joe Nuttall who produced a summit analysis programme using LIDAR, and then by LIDAR analysis initially conducted by Jim Bloomer and subsequently by Myrddyn Phillips.
LIDAR image of Ynys Fach (SN 668 951) |
30-99m Twmpau - Welsh hills at or above 30m and below 100m in height with 30m minimum
drop, with an accompanying sub list entitled the 30-99m Sub-Twmpau with the
criteria for this sub category being all Welsh hills at or above 30m and below
100m in height with 20m or more and below 30m of drop, with the word Twmpau
being an acronym standing for thirty
welsh metre prominences and upward.
The 30-99m Twmpau by Myrddyn Phillips |
Y Trechol - The Dominant Hills of Wales by Myrddyn Phillips |
When the original 30-99m height band of Welsh P30 hills were published on Geoff Crowder’s v-g.me website this hill was included in the Hills to be surveyed sub list that accompanied the main P30 list, as it was considered not to meet the criteria then used in the main P30 category.
After the sub list was standardised, and interpolated heights and drop values also included the details for this hill were re-evaluated and it was listed with an estimated c 27m of drop based on an estimated c 34m summit height and an estimated c 7m bwlch height, with both values based on interpolation of 10m contouring that appears on the Ordnance Survey 1:25,000 Explorer map, with 30m being the uppermost contour given the hill on this map.
Extract from the Ordnance Survey 1:25,000 Explorer map |
LIDAR summit image of Ynys Fach |
The term Significant Height Revisions applies to any listed hill whose interpolated height and Ordnance Survey or Harvey map summit spot height has a 2m or more discrepancy when compared to the survey result produced by the Trimble GeoXH 6000 or analysis of data produced via LIDAR, also included are hills whose summit map data is missing an uppermost ring contour when compared to the data produced by the Trimble or by LIDAR analysis.
Therefore, this hill’s new listed summit height is
43.5m and this was derived from LIDAR analysis, this is 9.5m higher than the
previous listed summit height of c 34m which was derived from interpolation of
the uppermost contour given the hill on contemporary Ordnance Survey 1:25,000
Explorer maps.
The full details for the hill are:
Group: Pumlumon
Name: Ynys Fach
OS 1:50,000 map: 135
Summit Height (New Height): 43.5m (LIDAR)
Summit Grid Reference: SN 66845 95141 (LIDAR)
Bwlch Height: 2.1m (LIDAR)
Bwlch Grid Reference: SN 67483 95096 (LIDAR)
Drop: 41.3m (LIDAR)
Dominance: 95.10% (LIDAR)
Myrddyn Phillips (April 2021)
No comments:
Post a Comment