Friday 11 June 2021

Mapping Mountains – Hill Reclassifications – 30-99m Twmpau


Pt. 30.8m (SH 296 848) – 30-99m Sub-Twmpau addition

There has been confirmation of an addition to the list of 30-99m Twmpau, with the summit height, bwlch height and their locations, the drop and status of the hill confirmed by LIDAR analysis conducted by Myrddyn Phillips. 

LIDAR image of Pt. 30.8m (SH 296 848)

The criteria for the list that this addition applies to are: 

30-99m Twmpau – Welsh hills at or above 30m and below 100m in height that have 30m minimum drop, with an accompanying sub list entitled the 30-99m Sub-Twmpau with the criteria for this sub category being all Welsh hills at or above 30m and below 100m in height with 20m or more and below 30m of drop, with the word Twmpau being an acronym standing for thirty welsh metre prominences and upward. 

The 30-99m Twmpau by Myrddyn Phillips

The hill is being listed by the point (Pt. 30.8m) notation as an appropriate name for it either through local enquiry and / or historic research has not been found by the author, and it is adjoined to the Ynys Môn group of hills, which are situated in the north-western part of North Wales (Region A, Sub-Region A1), and it is positioned with the coast to its west and a series of minor roads to its north, south and east, and has the village of Llanfachreth towards the south-east. 

When the original 30-99m height band of Welsh P30 hills were published on Geoff Crowder’s v-g.me website this hill was not included in the Hills to be surveyed sub list, as it was considered not to meet the criteria then used for this sub category. 

After the sub list was standardised, and interpolated heights and drop values also included the details for this hill were re-evaluated and it was listed with an estimated c 22m of drop, based on the 31m summit spot height that appears on the Ordnance Survey 1:25,000 Explorer map and an estimated c 9m bwlch height based on interpolation of 5m contouring between 5m – 10m. 

Extract from the Ordnance Survey 1:25,000 Explorer map

However, it was not until LIDAR became available that the details for this hill could be accurately re-assessed.  The LIDAR (Light Detection & Ranging) technique produced highly accurate height data that is now freely available for much of England and Wales. 

Therefore, the confirmation of the addition of this hill to 30-99m Sub-Twmpau status is due to LIDAR analysis, resulting in a 30.8m summit height and an 8.7m bwlch height, with these values giving this hill 22.1m of drop, which is sufficient for it to be classified as a 30-99m Sub-Twmpau. 

 

The full details for the hill are: 

Group:  Ynys Môn 

Name:  Pt. 30.8m 

OS 1:50,000 map:  114

Summit Height:  30.8m (LIDAR) 

Summit Grid Reference:  SH 29675 84885 (LIDAR) 

Bwlch Height:  8.7m (LIDAR) 

Bwlch Grid Reference:  SH 29963 84611 (LIDAR) 

Drop:  22.1m (LIDAR) 

 

Myrddyn Phillips (June 2021)

 

 

 

 

 

  

No comments:

Post a Comment