Mapping Mountains – Significant Height Revisions – 30-99m Twmpau and Y Trechol – The Dominant Hills of Wales

The Park (SN 664 936) 

There has been a Significant Height Revision to a hill that is listed in the 30-99m Twmpau and Y Trechol – The Dominant Hills of Wales, with the summit height, bwlch height and their locations, the drop, dominance and status of the hill derived from LIDAR analysis conducted by Myrddyn Phillips. 

LIDAR image of The Park (SN 664 936)

The criteria for the two listings that this height revision applies to are:

30-99m Twmpau - Welsh hills at or above 30m and below 100m in height with 30m minimum drop, with an accompanying sub list entitled the 30-99m Sub-Twmpau with the criteria for this sub category being all Welsh hills at or above 30m and below 100m in height with 20m or more and below 30m of drop, with the word Twmpau being an acronym standing for thirty welsh metre prominences and upward. 

The 30-99m Twmpau by Myrddyn Phillips

Y Trechol - The Dominant Hills of Wales - Welsh P30 hills whose prominence  equal or exceed half that of their absolute height.  With the criteria for Lesser Dominant status being those additional Welsh P30 hills whose prominence is between one third and half that of their absolute height, with the Introduction to the Mapping Mountains publication of this list appearing on the 3^rd December 2015, and the list is now available in its entirety on Mapping Mountains in Google Doc format. 

Y Trechol - The Dominant Hills of Wales by Myrddyn Phillips

The name the hill is listed by is The Park, and it is adjoined to the Pumlumon group of hills which are situated in the north-western part of Mid and West Wales (Region B, Sub-Region B2), and it is positioned with the Afon Dyfi to its north, the coast to its west and the A487 road to its east, and has the village of Tal-y-bont towards the south. 

When the original 30-99m height band of Welsh P30 hills published on Geoff Crowder’s v-g.me website were standardised and interpolated heights and drop values also included the details for this hill were re-evaluated, and it was listed with an estimated c 41m drop and 49.40% dominance, based on an estimated c 83m summit height and the 42m bwlch spot height that appears on the Ordnance Survey 1:25,000 Explorer map. 

Extract from the Ordnance Survey 1:25,000 Explorer map

However, it was not until LIDAR became available that the details for this hill could be accurately re-assessed.  The LIDAR (Light Detection & Ranging) technique produced highly accurate height data that is now freely available for much of England and Wales. 

LIDAR summit image of The Park (SN 664 936)

The summit height produced by LIDAR analysis is 85.6m and this comes within the parameters of the Significant Height Revisions used within this page heading, these parameters are: 

The term Significant Height Revisions applies to any listed hill whose interpolated height and Ordnance Survey or Harvey map summit spot height has a 2m or more discrepancy when compared to the survey result produced by the Trimble GeoXH 6000 or analysis of data produced via LIDAR, also included are hills whose summit map data is missing an uppermost ring contour when compared to the data produced by the Trimble or by LIDAR analysis. 

Therefore, the new listed summit height of this hill is 85.6m and this was derived from LIDAR analysis, this is 2.6m higher than the previous listed summit height of c 83m which was derived from interpolation of the uppermost contour given the hill on contemporary Ordnance Survey 1:25,000 Explorer maps.

 

ills of Wales, and are reproduced below@

The full details for the hill are:

Group:  Pumlumon 

Name:  The Park 

OS 1:50,000 map:  135

Summit Height (New Height):  85.6m (LIDAR)

Summit Grid Reference:  SN 66441 93678 (LIDAR)

Bwlch Height:  42.7m (LIDAR)

Bwlch Grid Reference:  SN 66477 93308 (LIDAR)

Drop:  42.9m (LIDAR)

Dominance:  50.09% (LIDAR)

 

Myrddyn Phillips (August 2021)