Mapping Mountains – Hill Reclassifications – Y Trichant – The 300m Hills of Wales

 

Y Foel (SJ 207 315) – Sub-Trichant addition

There has been confirmation of an addition to the list of Y Trichant – The 300m Hills of Wales, with the summit height, bwlch height and their locations, the drop and status of the hill derived from LIDAR analysis conducted by Myrddyn Phillips. 

LIDAR image of Y Fol (SJ 207 315)

The criteria for the list that this addition applies to are:

Y Trichant – The 300m Hills of Wales – Welsh hills at or above 300m and below 400m in height that have 30m minimum drop, with an accompanying sub list entitled the Sub-Trichant, with the criteria for this sub category being all Welsh hills at or above 300m and below 400m in height with 20m or more and below 30m of drop.  The list is authored by Myrddyn Phillips with the Introduction to the list and the renaming of it appearing on Mapping Mountains on the 13^th May 2017, and the Introduction to the Mapping Mountains publication of the list appearing on the 1^st January 2022. 

Y Trichant - The 300m Hills of Wales by Myrddyn Phillips

The name the hill is listed by is Y Foel and this was derived from the Ordnance Survey Draft Surveyors map, and it is adjoined to the Craig Berwyn group of hills, which are situated in the eastern part of North Wales (Region A, Sub-Region A3), and it is positioned encircled by minor roads, with the B4500 road farther to its north-west and the B4580 road farther to its south-east, and has the village of Glyn Ceiriog towards the north.

When the original 300m height band of Welsh P30 hills were published on Geoff Crowder’s v-g.me website, this hill was not included in the Hills to be surveyed sub list, as it was considered not to meet the criteria then used for this sub category.

After the sub list was standardised, and interpolated heights and drop values also included the details for this hill were re-evaluated and it was listed with 26m of drop, based on the 307m summit spot height and the 281m bwlch spot height that appear on the Ordnance Survey 1:25,000 Explorer map. 

Extract from the Ordnance Survey 1:25,000 Explorer map

However, it was not until LIDAR became available that the details for this hill could be accurately re-assessed.  The LIDAR (Light Detection & Ranging) technique produced highly accurate height data that is now freely available for much of England and Wales.

Therefore, the confirmation of the addition of this hill to Sub-Trichant status is due to LIDAR analysis, resulting in a 307.3m summit height and a 280.7m bwlch height, with these values giving this hill 26.6m of drop, which is sufficient for it to be classified as a Sub-Trichant. 

 

The full details for the hill are: 

Group:  Craig Berwyn 

Name:  Y Foel 

OS 1:50,000 map:  126

Summit Height:  307.3m (LIDAR)                                                           

Summit Grid Reference:  SJ 20741 31551 (LIDAR) 

Bwlch Height:  280.7m (LIDAR) 

Bwlch Grid Reference:  SJ 20979 31667 (LIDAR) 

Drop:  26.6m (LIDAR) 

 

Myrddyn Phillips (April 2022)