Sunday, 14 April 2024

Y Trichant – The 300m Hills of Wales – Significant Name Changes

 

Y Trichant – The 300m Hills of Wales – Significant Name Changes


Y Trichant - The 300m Hills of Wales are the Welsh hills at or above 300m and below 40om in height that have a minimum drop of 30m.  Accompanying the main P30 list is a sub list entitled the Sub-Trichant, with the qualification to this sub category being all Welsh hills at or above 300m and below 400m in height with 20m or more and below 30m of drop, with the Introduction to the re-naming of this list and its publication history appearing on Mapping Mountains on 13th May 2017.

The list is authored by Myrddyn Phillips and the posts that have appeared on Mapping Mountains detailing the Significant Name Changes to the main P30 list and the sub list appear below presented chronologically in receding order.








Mapping Mountains - Significant Name Changes - Y Trichant - The 300m Hills of Wales

Pt. 323.6m (SN 987 839) - 260th significant name changes

Summit Relocations post for Pt. 323.6m

 

There has been a Significant Name Change to a hill that is listed in the Y Trichant – The 300m Hills of Waleswith the summit height, bwlch height and their locations, the drop and status of the hill derived from LIDAR analysis conducted by Myrddyn Phillips. 

LIDAR image of Pt. 323.6m (SN 987 839)

The criteria for the list that this name change applies to are:

Y Trichant – The 300m Hills of Wales – Welsh hills at or above 300m and below 400m in height that have 30m minimum drop, with an accompanying sub list entitled the Sub-Trichant, with the criteria for this sub category being all Welsh hills at or above 300m and below 400m in height with 20m or more and below 30m of drop.  The list is authored by Myrddyn Phillips with the Introduction to the list and the renaming of it appearing on Mapping Mountains on the 13th May 2017, and the Introduction to the Mapping Mountains publication of the list appearing on the 1st January 2022. 

Y Trichant - The 300m Hills of Wales by Myrddyn Phillips

The hill is adjoined to the Hirddywel group of hills, which are situated in the northern part of South Wales (Region B, Sub-Region B2), and it is positioned with the A470 road to its north and minor roads to its west and east, and has the town of Llanidloes towards the west.

The hill appeared in the original 300m height band of Welsh P30 hills published on Geoff Crowder’s v-g.me website, under the transposed name of Pen-y-banc, with an accompanying note stating; Name from buildings to the North.


Pen-y-banc320cSN988840136214Name from buildings to the North


During my early hill listing I thought it appropriate to either invent a name for a hill, or use a name that appeared near to the summit of the hill on Ordnance Survey maps of the day.  My preference was to use farm names and put PenBryn or Moel in front of them.  This is not a practice that I now advocate as with time and inclination place-name data can be improved either by asking local people or by examining historic documents, through this form of research an appropriate name for the hill can usually be found.

Extract from the Ordnance Survey 1:25,000 Explorer map

However, on occasion even when research is conducted an appropriate name for the hill may not be found, and on such occasions the listing protocol is to use the point (Pt. 323.6) notation, and for this hill this is such an example.

Therefore, the name this hill is now listed by in the Trichant – The 300m Hills of Wales is Pt. 323.6m, and this is being used as the author has not found an appropriate name for the hill either through historic research and/or local enquiry.                                                                        


The full details for the hill are: 

Group:  Hirddywel 

Name:  Pt. 323.6m 

Previously Listed Name:  Pen-y-banc 

OS 1:50,000 map:  136

Summit Height:  323.6m (LIDAR)                                                           

Summit Grid Reference:  SN 98748 83949 (LIDAR) 

Bwlch Height:  284.3m (LIDAR) 

Bwlch Grid Reference:  SN 98638 83494 (LIDAR) 

Drop:  39.3m (LIDAR) 

 

Myrddyn Phillips (December 2024)




Mapping Mountains - Significant Name Changes - Y Trichant - The 300m Hills of Wales

Cefn Lladron (SO 058 908) - 259th significant name change

 

There has been a Significant Name Change to a hill that is listed in the Y Trichant – The 300m Hills of Waleswith the summit height, bwlch height and their locations, the drop and status of the hill derived from LIDAR analysis conducted by Myrddyn Phillips. 

LIDAR image of Cefn Lladron (SO 058 908)

The criteria for the list that this name change applies to are:

Y Trichant – The 300m Hills of Wales – Welsh hills at or above 300m and below 400m in height that have 30m minimum drop, with an accompanying sub list entitled the Sub-Trichant, with the criteria for this sub category being all Welsh hills at or above 300m and below 400m in height with 20m or more and below 30m of drop.  The list is authored by Myrddyn Phillips with the Introduction to the list and the renaming of it appearing on Mapping Mountains on the 13th May 2017, and the Introduction to the Mapping Mountains publication of the list appearing on the 1st January 2022. 

Y Trichant - The 300m Hills of Wales by Myrddyn Phillips

The hill is adjoined to the Hirddywel group of hills, which are situated in the northern part of South Wales (Region B, Sub-Region B2), and it is positioned with the A489 road to its north and minor roads to its south-west and south-east, and has the town of Y Drenewydd (Newtown) towards the east.

The hill appeared in the original 300m height band of Welsh P30 hills published on Geoff Crowder’s v-g.me website, under the transposed name of Cefn-nith, with an accompanying note stating; aka Penstrowed Hill.


Cefn-nith315mSO059908136214/215317m on 1986 1:50000 map. aka Penstrowed Hill


During my early hill listing I thought it appropriate to either invent a name for a hill, or use a name that appeared near to the summit of the hill on Ordnance Survey maps of the day, with little consideration for the meaning of the name used and where it was appropriately applied to.  My preference was to use farm names and put PenBryn or Moel in front of them or as in this instance transpose a prominent name that appears near the summit of this hill on the Ordnance Survey 1:50,000 Landranger and 1:25,000 Explorer map.  This is not a practice that I now advocate as with time and inclination place-name data can be improved either by asking local people or by examining historic documents, through this form of research an appropriate name for the hill can usually be found. 

Extract from the Ordnance Survey 1:25,000 Explorer map

Since the original publication of the Welsh P30 lists on Geoff Crowder’s v-g.me website there have been a number of maps made available online.  Some of these are historic such as the series of Six-Inch maps on the National Library of Scotland website.  Whilst others were digitally updated such as the Ordnance Survey Vector Map Local that was hosted on the Geograph website and which was entitled the Interactive Coverage Map, whilst others are current and digitally updated such as the interactive mapping on the Magic Maps and WalkLakes websites, and it is the series of Ordnance Survey Six-Inch maps that form the basis of the change in the listed name of this hill. 

Extract from the Ordnance Survey series of Six-Inch maps

The Ordnance Survey series of Six-Inch maps formed the base map Ordnance Survey used for many decades leading to the production of the 1:10,000 Series of maps, both have now been superseded by the digitised Master Map.  The series of Six-Inch maps are excellent for name placement and especially so compared to the contemporary Ordnance Survey 1:25,000 Explorer map, and it is the series of Six-Inch maps as well as the contemporary Ordnance Survey 1:25,000 Explorer map that place the name of Cefn Lladron adjacent to the summit of this hill.

Therefore, the name this hill is now listed by in the Trichant – The 300m Hills of Wales is Cefn Lladron and this was derived from the contemporary Ordnance Survey 1:25,000 Explorer map and confirmed by the Ordnance Survey series of Six-Inch maps. 

 

The full details for the hill are: 

Group:  Hirddywel 

Name:  Cefn Lladron 

Previously Listed Name:  Cefn-nith 

OS 1:50,000 map:  136

Summit Height:  316.4m (LIDAR)                                                           

Summit Grid Reference:  SO 05867 90814 (LIDAR) 

Bwlch Height:  288.1m (LIDAR) 

Bwlch Grid Reference:  SO 05336 90482 (LIDAR) 

Drop:  28.3m (LIDAR) 

 

Myrddyn Phillips (November 2024) 




Mapping Mountains - Significant Name Changes - Y Trichant - The 300m Hills of Wales

Cnwc yr Hydd (SN 082 344) - 258th significant name change

 

There has been a Significant Name Change to a hill that is listed in the Y Trichant – The 300m Hills of Waleswith the summit height, bwlch height and their locations, the drop and status of the hill derived from LIDAR analysis conducted by Myrddyn Phillips. 

LIDAR image of Cnwc yr Hydd (SN 082 344)

The criteria for the list that this name change applies to are:

Y Trichant – The 300m Hills of Wales – Welsh hills at or above 300m and below 400m in height that have 30m minimum drop, with an accompanying sub list entitled the Sub-Trichant, with the criteria for this sub category being all Welsh hills at or above 300m and below 400m in height with 20m or more and below 30m of drop.  The list is authored by Myrddyn Phillips with the Introduction to the list and the renaming of it appearing on Mapping Mountains on the 13th May 2017, and the Introduction to the Mapping Mountains publication of the list appearing on the 1st January 2022. 

Y Trichant - The 300m Hills of Wales by Myrddyn Phillips

The hill is adjoined to the Mynydd Preseli group of hills, which are situated in the south-western part of South Wales (Region B, Sub-Region B1), and it is positioned with minor roads to its east, north and west, and the B4329 road farther to its south-east, and has the town of Trefdraeth (Newport) towards the north north-west.

The hill appeared in the original 300m height band of Welsh P30 hills published on Geoff Crowder’s v-g.me website, under the transposed name of Waun Mawr, with an accompanying note stating; aka Cnwc yr Hydd.


Waun Mawr339mSN08334414535aka Cnwc yr Hydd


During my early hill listing I thought it appropriate to either invent a name for a hill, or use a name that appeared near to the summit of the hill on Ordnance Survey maps of the day, with little consideration for the meaning of the name used and where it was appropriately applied to.  My preference was to use farm names and put PenBryn or Moel in front of them or as in this instance transpose a prominent name that appears just to the south of the summit on the Ordnance Survey 1:50,000 Landranger and 1:25,000 Explorer map.  This is not a practice that I now advocate as with time and inclination place-name data can be improved either by asking local people or by examining historic documents, through this form of research an appropriate name for the hill can usually be found. 

Extract from the Ordnance Survey 1:25,000 Explorer map

Since the original publication of the Welsh P30 lists on Geoff Crowder’s v-g.me website there have been a number of maps made available online.  Some of these are historic such as the series of Six-Inch maps on the National Library of Scotland website.  Whilst others were digitally updated such as the Ordnance Survey Vector Map Local that was hosted on the Geograph website and which was entitled the Interactive Coverage Map, whilst others are current and digitally updated such as the interactive mapping on the Magic Maps and WalkLakes websites, and it is the series of Ordnance Survey Six-Inch maps that form the basis of the change in the listed name of this hill. 

Extract from the Ordnance Survey series of Six-Inch maps

The Ordnance Survey series of Six-Inch maps formed the base map Ordnance Survey used for many decades leading to the production of the 1:10,000 Series of maps, both have now been superseded by the digitised Master Map.  The series of Six-Inch maps are excellent for name placement and especially so compared to the contemporary Ordnance Survey 1:25,000 Explorer map, and it is the series of Six-Inch maps that place the name of Cnwc yr Hydd adjacent to the summit of this hill with the name of Waun Mawr applied to a feature of the hill to the south.

Therefore, the name this hill is now listed by in the Trichant – The 300m Hills of Wales is Cnwc yr Hydd and this was derived from the contemporary Ordnance Survey 1:25,000 Explorer map and confirmed by the Ordnance Survey series of Six-Inch maps. 

 

The full details for the hill are: 

Group:  Mynydd Preseli 

Name:  Cnwc yr Hydd 

Previously Listed Name:  Waun Mawr 

OS 1:50,000 map:  145

Summit Height:  339.1m (LIDAR)                                                           

Summit Grid Reference:  SN 08290 34475 (LIDAR) 

Bwlch Height:  291.7m (LIDAR) 

Bwlch Grid Reference:  SN 08175 33624 (LIDAR) 

Drop:  47.4m (LIDAR) 

 

Myrddyn Phillips (October 2024)

 



Mapping Mountains - Significant Name Changes - Y Trichant - The 300m Hills of Wales

Mynydd Llandyfalle (SO 088 361) - 257th significant name change

Hill Reclassifications post for Mynydd Llandyfalle

 

There has been a Significant Name Change to a hill that is listed in the Y Trichant – The 300m Hills of Waleswith the summit height, bwlch height and their locations, the drop and status of the hill derived from LIDAR analysis conducted by Myrddyn Phillips. 

LIDAR image of Mynydd Llandyfalle (SO 088 361)

The criteria for the list that this name change applies to are:

Y Trichant – The 300m Hills of Wales – Welsh hills at or above 300m and below 400m in height that have 30m minimum drop, with an accompanying sub list entitled the Sub-Trichant, with the criteria for this sub category being all Welsh hills at or above 300m and below 400m in height with 20m or more and below 30m of drop.  The list is authored by Myrddyn Phillips with the Introduction to the list and the renaming of it appearing on Mapping Mountains on the 13th May 2017, and the Introduction to the Mapping Mountains publication of the list appearing on the 1st January 2022. 

Y Trichant - The 300m Hills of Wales by Myrddyn Phillips

The hill is adjoined to the Mynydd Epynt group of hills, which are situated in the central part of South Wales (Region B, Sub-Region B1), and it is positioned encircled by minor roads, with the B4520 road farther to its west, the A470 road farther to its south, east and north-east, and has the town of Talgarth towards the east south-east.

When the original 300m height band of Welsh P30 hills were published on Geoff Crowder’s v-g.me website, this hill was not included in the Hills to be surveyed sub list, as it was considered not to meet the criteria then used for this sub category.

After the sub list was standardised, and interpolated heights and drop values also included the details for this hill were re-evaluated and it was listed under the point (Pt. 347m) notation with an estimated c 20m of drop, based on the 347m summit spot height that appears on the contemporary Ordnance Survey 1:50,000 Landranger and 1:25,000 Explorer map and an estimated c 327m bwlch height, based on interpolation of 10m contouring between 320m – 330m. 

Extract from the Ordnance Survey 1:25,000 Explorer map

Since the original publication of the Welsh P30 lists on Geoff Crowder’s v-g.me website there have been a number of maps made available online.  Some of these are historic such as the series of Six-Inch maps on the National Library of Scotland website.  Whilst others were digitally updated such as the Ordnance Survey Vector Map Local hosted on the Geograph website and which was entitled the Interactive Coverage Map, whilst others are current and digitally updated such as the interactive mapping on the Magic Maps and WalkLakes websites.  One of the historic maps now available online is the Ordnance Survey Draft Surveyors map which formed the basis for the first publicly available Ordnance Survey One-Inch ‘Old Series’ map, and it is the Draft Surveyors map that has instigated the change in the listed name of this hill. 

Extract from the Ordnance Survey Draft Surveyors map

The Draft Surveyors maps consist of the preliminary drawings made by the Ordnance Survey surveyors between the 1780s and 1840 and formed the basis for the first publicly available One-Inch map.  They were drawn at scales of six inches to the mile for areas considered of particular military significance and down to two inches to the mile for other areas.  Fair copies were then produced from these preliminary drawings to one inch to the mile and then copper plates were prepared for printing.  The Draft Surveyors maps for the whole of Wales are now available online and they form an important part in the study of Welsh upland place-names as they bridge the time frame between the late 18th century and the mid-19th century when the Ordnance Survey produced their first One-Inch maps, and importantly for this hill and its listed name, it is this map that places the name Mynydd Llandyfalle across what is now open access land and which takes in the summit of this hill.

Therefore, the name this hill is now listed by in the Trichant – The 300m Hills of Wales is Mynydd Llandyfalle and this was derived from the Ordnance Survey Draft Surveyors map. 

 

The full details for the hill are: 

Group:  Mynydd Epynt 

Name:  Mynydd Llandyfalle 

Previously Listed Name:  Pt. 347m 

OS 1:50,000 map:  160

Summit Height:  347.7m (LIDAR)                                                           

Summit Grid Reference:  SO 08800 36195 (LIDAR) 

Bwlch Height:  327.1m (LIDAR) 

Bwlch Grid Reference:  SO 08140 36189 (LIDAR) 

Drop:  20.6m (LIDAR) 

 

Myrddyn Phillips (September 2024)




Mapping Mountains - Significant Name Changes - Y Trichant - The 300m Hills of Wales

Pen Rhiw Einon (SO 075 380) - 256th significant name change

Significant Height Revisions post for Pen Rhiw Einon

 

There has been a Significant Name Change to a hill that is listed in the Y Trichant – The 300m Hills of Wales, with the summit height, bwlch height and their locations, the drop and status of the hill derived from LIDAR analysis conducted by Myrddyn Phillips. 

LIDAR image of Pen Rhiw Einon (SO 075 380)

The criteria for the list that this name change applies to are:

Y Trichant – The 300m Hills of Wales – Welsh hills at or above 300m and below 400m in height that have 30m minimum drop, with an accompanying sub list entitled the Sub-Trichant, with the criteria for this sub category being all Welsh hills at or above 300m and below 400m in height with 20m or more and below 30m of drop.  The list is authored by Myrddyn Phillips with the Introduction to the list and the renaming of it appearing on Mapping Mountains on the 13th May 2017, and the Introduction to the Mapping Mountains publication of the list appearing on the 1st January 2022. 

Y Trichant - The 300m Hills of Wales by Myrddyn Phillips

The hill is adjoined to the Mynydd Epynt group of hills, which are situated in the central part of South Wales (Region B, Sub-Region B1), and it is positioned encircled by minor roads, with the B4520 road farther to its west and the A470 road farther to its east, and has the small community of Erwyd (Erwood) towards the north north-east.

The hill appeared in the original 300m height bandof Welsh P30 hills published on Geoff Crowder’s v-g.me website, under the transposed name of Penrhiw-goch, with an accompanying note stating; Name from buildings to the South-East.


Penrhiw-goch379mSO075381160188Name from buildings to the South-East


During my early hill listing I thought it appropriate to either invent a name for a hill, or use a name that appeared near to the summit of the hill on Ordnance Survey maps of the day.  My preference was to use farm names and put PenBryn or Moel in front of them or as in this instance transpose a name of a farm and use it for that of the hill.  This is not a practice that I now advocate as with time and inclination place-name data can be improved either by asking local people or by examining historic documents, through this form of research an appropriate name for the hill can usually be found. 

Extract from the Ordnance Survey 1:25,000 Explorer map

As the summit of this hill comprises bounded land the details for it were examined on the Tithe map.  The term Tithe map is generally given to a map of a Welsh or English parish or township and which was prepared after the 1836 Tithe Commutation Act.  This act allowed tithes to be paid in cash rather than goods.  The Tithe maps gave names of owners and occupiers of land in each parish and importantly for place-name research they also included the name of enclosed land.  This enclosed land is usually based on a field system, however not every field is given a name, but many are and especially so in Wales. 

Extract from the Tithe map

The enclosed land where the summit of this hill is situated is given the number 11 on the Tithe map, this can be cross referenced against the apportionments; it is these apportionments that give the name of the owner or occupier of the land as well as the name of the land.  The land where the summit of this hill is situated is named as a part of Pen Rhiw Einon farm in the apportionments, with the details on the Tithe map appearing in the parish of Llandyfalle and in the county named as Brecon. 

Extract from the apportionments

Therefore, the name this hill is now listed by in the Trichant – The 300m Hills of Wales is Pen Rhiw Einon and this was derived from the Tithe map. 

 

The full details for the hill are: 

Group:  Mynydd Epynt 

Name:  Pen Rhiw Einon 

Previously Listed Name:  Penrhiw-goch 

OS 1:50,000 map:  160

Summit Height:  376.4m (LIDAR)                                                           

Summit Grid Reference:  SO 07517 38090 (LIDAR) 

Bwlch Height:  345.6m (LIDAR) 

Bwlch Grid Reference:  SO 07458 37640 (LIDAR) 

Drop:  30.8m (LIDAR) 

 

Myrddyn Phillips (August 2024)




Mapping Mountains - Significant Name Changes - Y Trichant - The 300m Hills of Wales

Mynydd Fforest (SO 086 389) - 255th significant name change

Hill Reclassifications post for Mynydd Fforest

 

There has been a Significant Name Change to a hill that is listed in the Y Trichant – The 300m Hills of Waleswith the summit height, bwlch height and their locations, the drop and status of the hill derived from LIDAR analysis conducted by Myrddyn Phillips. 

LIDAR image of Mynydd Fforest (SO 086 389)

The criteria for the list that this name change applies to are:

Y Trichant – The 300m Hills of Wales – Welsh hills at or above 300m and below 400m in height that have 30m minimum drop, with an accompanying sub list entitled the Sub-Trichant, with the criteria for this sub category being all Welsh hills at or above 300m and below 400m in height with 20m or more and below 30m of drop.  The list is authored by Myrddyn Phillips with the Introduction to the list and the renaming of it appearing on Mapping Mountains on the 13th May 2017, and the Introduction to the Mapping Mountains publication of the list appearing on the 1st January 2022. 

Y Trichant - The 300m Hills of Wales by Myrddyn Phillips

The hill is adjoined to the Mynydd Epynt group of hills, which are situated in the central part of South Wales (Region B, Sub-Region B1), and it is positioned with minor roads to its west and south, and the A470 road to its east, and has the small community of Erwyd (Erwood) towards the north north-east.

When the original 300m height band of Welsh P30 hills were published on Geoff Crowder’s v-g.me website, this hill was not included in the Hills to be surveyed sub list, as it was considered not to meet the criteria then used for this sub category.

After the sub list was standardised, and interpolated heights and drop values also included the details for this hill were re-evaluated and it was listed under the point (Pt. 376m) notation with an estimated c 20m of drop, based on the 376m summit spot height that appears on the contemporary Ordnance Survey 1:50,000 Landranger and 1:25,000 Explorer map and an estimated c 356m bwlch height, based on interpolation of 10m contouring between 350m – 360m. 

Extract from the Ordnance Survey 1:25,000 Explorer map

Since the original publication of the Welsh P30 lists on Geoff Crowder’s v-g.me website there have been a number of maps made available online.  Some of these are historic such as the series of Six-Inch maps on the National Library of Scotland website.  Whilst others were digitally updated such as the Ordnance Survey Vector Map Local hosted on the Geograph website and which was entitled the Interactive Coverage Map, whilst others are current and digitally updated such as the interactive mapping on the Magic Maps and WalkLakes websites.  One of the historic maps now available online is the Ordnance Survey Draft Surveyors map which formed the basis for the first publicly available Ordnance Survey One-Inch ‘Old Series’ map, and it is the Draft Surveyors map along with the contemporary Ordnance Survey 1:50,000 Landranger and 1:25,000 Explorer map that has instigated the change in the listed name of this hill. 

Extract from the Ordnance Survey Draft Surveyors map

The Draft Surveyors maps consist of the preliminary drawings made by the Ordnance Survey surveyors between the 1780s and 1840 and formed the basis for the first publicly available One-Inch map.  They were drawn at scales of six inches to the mile for areas considered of particular military significance and down to two inches to the mile for other areas.  Fair copies were then produced from these preliminary drawings to one inch to the mile and then copper plates were prepared for printing.  The Draft Surveyors maps for the whole of Wales are now available online and they form an important part in the study of Welsh upland place-names as they bridge the time frame between the late 18th century and the mid-19th century when the Ordnance Survey produced their first One-Inch maps, and importantly for this hill and its listed name, it is this map that places the name Mynydd Fforest across what is now open access land and which takes in the summit of this hill.

Therefore, the name this hill is now listed by in the Trichant – The 300m Hills of Wales is Mynydd Fforest and this was derived from the Ordnance Survey Draft Surveyors map in conjunction with the contemporary Ordnance Survey 1:50,000 Landranger and 1:25,000 Explorer map. 

 

The full details for the hill are: 

Group:  Mynydd Epynt 

Name:  Mynydd Fforest 

Previously Listed Name:  Pt. 376m 

OS 1:50,000 map:  160

Summit Height:  375.6m (LIDAR)                                                           

Summit Grid Reference:  SO 08614 38958 & SO 08615 38959 (LIDAR) 

Bwlch Height:  353.55m (LIDAR) 

Bwlch Grid Reference:  SO 09049 38950 (LIDAR) 

Drop:  22.0m (LIDAR) 

 

Myrddyn Phillips (August 2024)




Mapping Mountains - Significant Name Changes - Y Trichant - The 300m Hills of Wales

Lan Ucha Ty’n y Wern (SN 996 423) - 254th significant name change

Summit Relocations post for Lan Ucha Ty'n y Wern

 

There has been a Significant Name Change to a hill that is listed in the Y Trichant – The 300m Hills of Wales and the Y Pedwarau – The 400m Hills of Wales, with the summit height, bwlch height and their locations, the drop and status of the hill derived from LIDAR analysis initially conducted by Aled Williams and subsequently by Myrddyn Phillips. 

LIDAR image of Lan Ucha Ty'n y Wern (SN 996 423)

The criteria for the lists that this name change applies to are:

Y Trichant – The 300m Hills of Wales – Welsh hills at or above 300m and below 400m in height that have 30m minimum drop, with an accompanying sub list entitled the Sub-Trichant, with the criteria for this sub category being all Welsh hills at or above 300m and below 400m in height with 20m or more and below 30m of drop.  The list is authored by Myrddyn Phillips with the Introduction to the list and the renaming of it appearing on Mapping Mountains on the 13th May 2017, and the Introduction to the Mapping Mountains publication of the list appearing on the 1st January 2022. 

Y Trichant - The 300m Hills of Wales by Myrddyn Phillips

Y Pedwarau – The 400m Hills of Wales – Welsh hills at or above 400m and below 500m in height that have 30m minimum drop, accompanying the main list are five categories of sub hills, with this hill listed in the 390m Sub-Pedwar category.  The criteria for this category are all Welsh hills at or above 390m and below 400m in height that have 30m minimum drop.  The list is co-authored byMyrddyn Phillips and Aled Williams and is published on Mapping Mountains in Google Doc format.

Y Pedwarau - The 400m Hills of Wales by Myrddyn Phillips and Aled Williams

The hill is adjoined to the Mynydd Epynt group of hills, which are situated in the central part of South Wales (Region B, Sub-Region B1), and it is positioned with the B4519 road to its north-east and a minor road to its south, and has the small community of Capel Uchaf (Upper Chapel) towards the south-east.

The hill appeared in the original 300m height band of Welsh P30 hills compiled by Myrddyn Phillips and published on GeoffCrowder’s v-g.me website, under the invented and transposed name of Twyn y Mynachdy, with an accompanying note stating; Name from buildings to the West.


Twyn y Mynachdy398mSN996423147/160188Included by contour configuration. Name from buildings to the West


During the original compilation Myrddyn Phillips thought it appropriate to either invent a name for a hill, or use a name that appeared near to the summit of the hill on Ordnance Survey maps of the day.  His preference was to use farm names and put PenBryn or Moel in front of them or as in this instance transpose a name of a farm and add the words Twyn y to it.  This is not a practice that is now advocated as with time and inclination place-name data can be improved either by asking local people or by examining historic documents, through this form of research an appropriate name for the hill can usually be found. 

Extract from the Ordnance Survey 1:25,000 Explorer map

As the summit of this hill comprises bounded land the details for it were examined on the Tithe map.  The term Tithe map is generally given to a map of a Welsh or English parish or township and which was prepared after the 1836 Tithe Commutation Act.  This act allowed tithes to be paid in cash rather than goods.  The Tithe maps gave names of owners and occupiers of land in each parish and importantly for place-name research they also included the name of enclosed land.  This enclosed land is usually based on a field system, however not every field is given a name, but many are and especially so in Wales. 

Extract from the Tithe map

The enclosed land where the summit of this hill is situated is given the number 1909 on the Tithe map, this can be cross referenced against the apportionments; it is these apportionments that give the name of the owner or occupier of the land as well as the name of the land.  The land where the summit of this hill is situated is named as Lan Ucha (of the farm) Ty’n y Wern in the apportionments, with the details on the Tithe map appearing in the parish of Merthyr Cynog and in the county named as Brecon. 

Extract from the apportionments

Therefore, the name this hill is now listed by in the Trichant – The 300m Hills of Wales and the Y Pedwarau – The 400m Hills of Wales iLan Ucha Ty’n y Wern and this was derived from the Tithe map. 

 

The full details for the hill are: 

Group:  Mynydd Epynt 

Name:  Lan Ucha Ty’n y Wern 

Previously Listed Name:  Twyn y Mynachdy 

OS 1:50,000 map:  147, 160

Summit Height:  396.7m (LIDAR)                                                           

Summit Grid Reference:  SN 99632 42324 (LIDAR)                                         

Bwlch Height:  362.65m (LIDAR) 

Bwlch Grid Reference:  SN 99601 42833 (LIDAR) 

Drop:  34.1m (LIDAR) 

 

Myrddyn Phillips (July 2024)




Mapping Mountains - Significant Name Changes - Y Trichant - The 300m Hills of Wales

Mynydd Aberysgir (SN 981 323) - 253rd significant name change

 

There has been a Significant Name Change to a hill that is listed in the Y Trichant – The 300m Hills of Waleswith the summit height, bwlch height and their locations, the drop and status of the hill derived from LIDAR analysis conducted by Myrddyn Phillips. 

LIDAR image of Mynydd Aberysgir (SN 981 323)

The criteria for the list that this name change applies to are:

Y Trichant – The 300m Hills of Wales – Welsh hills at or above 300m and below 400m in height that have 30m minimum drop, with an accompanying sub list entitled the Sub-Trichant, with the criteria for this sub category being all Welsh hills at or above 300m and below 400m in height with 20m or more and below 30m of drop.  The list is authored by Myrddyn Phillips with the Introduction to the list and the renaming of it appearing on Mapping Mountains on the 13th May 2017, and the Introduction to the Mapping Mountains publication of the list appearing on the 1st January 2022. 

Y Trichant - The 300m Hills of Wales by Myrddyn Phillips

The hill is adjoined to the Mynydd Epynt group of hills, which are situated in the central part of South Wales (Region B, Sub-Region B1), and it is positioned encircled by minor roads, with the A40 road farther to its south, and has the town of Aberhonddu (Brecon) towards the south-east.

The hill appeared in the original 300m height band of Welsh P30 hills published on Geoff Crowder’s v-g.me website, under the invented and transposed name of Mynydd Aberbiran, with an accompanying note stating; Name from stream to the South-West.


Mynydd Aberbiran377mSN98232316012Trig pillar. Name from stream to the South-West


During my early hill listing I thought it appropriate to either invent a name for a hill, or use a name that appeared near to the summit of the hill on Ordnance Survey maps of the day.  My preference was to use farm names and put PenBryn or Moel in front of them or as in this instance transpose the name of a stream and add the word Mynydd to it.  This is not a practice that I now advocate as with time and inclination place-name data can be improved either by asking local people or by examining historic documents, through this form of research an appropriate name for the hill can usually be found. 

Extract from the Ordnance Survey 1:25,000 Explorer map

Since the original publication of the Welsh P30 lists on Geoff Crowder’s v-g.me website there have been a number of maps made available online.  Some of these are historic such as the series of Six-Inch maps on the National Library of Scotland website.  Whilst others were digitally updated such as the Ordnance Survey Vector Map Local hosted on the Geograph website and which was entitled the Interactive Coverage Map, whilst others are current and digitally updated such as the interactive mapping on the Magic Maps and WalkLakes websites.  One of the historic maps now available online is the Ordnance Survey Draft Surveyors map which formed the basis for the first publicly available Ordnance Survey One-Inch ‘Old Series’ map, and it is the Draft Surveyors map along with the contemporary Ordnance Survey 1:50,000 Landranger and 1:25,000 Explorer map and the Tithe map that has instigated the change in the listed name of this hill.

The Draft Surveyors maps consist of the preliminary drawings made by the Ordnance Survey surveyors between the 1780s and 1840 and formed the basis for the first publicly available One-Inch map.  They were drawn at scales of six inches to the mile for areas considered of particular military significance and down to two inches to the mile for other areas.  Fair copies were then produced from these preliminary drawings to one inch to the mile and then copper plates were prepared for printing.  The Draft Surveyors maps for the whole of Wales are now available online and they form an important part in the study of Welsh upland place-names as they bridge the time frame between the late 18th century and the mid-19th century when the Ordnance Survey produced their first One-Inch maps, and importantly for this hill and its listed name, it is this map that places the name Mynydd Aber Esgair close to its summit. 

Extract from the Ordnance Survey Draft Surveyors map

As the summit of this hill comprises bounded land the details for it were examined on the Tithe map.  The term Tithe map is generally given to a map of a Welsh or English parish or township and which was prepared after the 1836 Tithe Commutation Act.  This act allowed tithes to be paid in cash rather than goods.  The Tithe maps gave names of owners and occupiers of land in each parish and importantly for place-name research they also included the name of enclosed land.  This enclosed land is usually based on a field system, however not every field is given a name, but many are and especially so in Wales. 

Extract from the Tithe map

The enclosed land where the summit of this hill is situated is given the number 20 on the Tithe map, this can be cross referenced against the apportionments; it is these apportionments that give the name of the owner or occupier of the land as well as the name of the land.  The land where the summit of this hill is situated is named as Aberysgir Common in the apportionments, with the details on the Tithe map appearing in the parish of Aberysgir and in the county named as Brecon. 

Extract from the apportionments

Therefore, the name this hill is now listed by in the Trichant – The 300m Hills of Wales is Mynydd Aberysgir and this was derived from the Ordnance Survey 1:50,000 Landranger and 1:25,000 Explorer map in combination with the Ordnance Survey Draft Surveyors map and the Tithe map. 

 

The full details for the hill are: 

Group:  Mynydd Epynt 

Name:  Mynydd Aberysgir 

Previously Listed Name:  Mynydd Aberbiran 

OS 1:50,000 map:  160

Summit Height:  376.9m (LIDAR)                                                           

Summit Grid Reference:  SN 98148 32329 (LIDAR) 

Bwlch Height:  322.9m (LIDAR) 

Bwlch Grid Reference:  SN 97687 33562 (LIDAR) 

Drop:  54.0m (LIDAR) 

 

Myrddyn Phillips (July 2024)




Mapping Mountains - Significant Name Changes - Y Trichant - The 300m Hills of Wales

Gwar Alltyfron (SN 998 494) - 252nd significant name change

 

There has been a Significant Name Change to a hill that is listed in the Y Trichant – The 300m Hills of Waleswith the summit height, bwlch height and their locations, the drop and status of the hill derived from LIDAR analysis conducted by Myrddyn Phillips. 

LIDAR image of Gwar Alltyfron (SN 998 494)

The criteria for the list that this name change applies to are:

Y Trichant – The 300m Hills of Wales – Welsh hills at or above 300m and below 400m in height that have 30m minimum drop, with an accompanying sub list entitled the Sub-Trichant, with the criteria for this sub category being all Welsh hills at or above 300m and below 400m in height with 20m or more and below 30m of drop.  The list is authored by Myrddyn Phillips with the Introduction to the list and the renaming of it appearing on Mapping Mountains on the 13th May 2017, and the Introduction to the Mapping Mountains publication of the list appearing on the 1st January 2022. 

Y Trichant - The 300m Hills of Wales by Myrddyn Phillips

The hill is adjoined to the Mynydd Epynt group of hills, which are situated in the central part of South Wales (Region B, Sub-Region B1), and it is positioned with minor roads to its north and south, and the A488 road farther to its north-west, and has the town of Llanfair-ym-Muallt (Builth Wells) towards the east north-east.

The hill appeared in the original 300m height band of Welsh P30 hills published on Geoff Crowder’s v-g.me website, under the invented and transposed name of Bryn y Pantyblodau, with an accompanying note stating; Name from buildings to the West.


Bryn y Pantyblodau340cSN998495147188Name from buildings to the West


During my early hill listing I thought it appropriate to either invent a name for a hill, or use a name that appeared near to the summit of the hill on Ordnance Survey maps of the day.  My preference was to use farm names and put PenBryn or Moel in front of them or as in this instance transpose a name of a farm and add the words Bryn y to it.  This is not a practice that I now advocate as with time and inclination place-name data can be improved either by asking local people or by examining historic documents, through this form of research an appropriate name for the hill can usually be found. 

Extract from the Ordnance Survey 1:25,000 Explorer map

As the summit of this hill comprises bounded land the details for it were examined on the Tithe map.  The term Tithe map is generally given to a map of a Welsh or English parish or township and which was prepared after the 1836 Tithe Commutation Act.  This act allowed tithes to be paid in cash rather than goods.  The Tithe maps gave names of owners and occupiers of land in each parish and importantly for place-name research they also included the name of enclosed land.  This enclosed land is usually based on a field system, however not every field is given a name, but many are and especially so in Wales. 

Extract from the Tithe map

The enclosed land where the summit of this hill is situated is given the number 237 on the Tithe map, this can be cross referenced against the apportionments; it is these apportionments that give the name of the owner or occupier of the land as well as the name of the land.  The land where the summit of this hill is situated is named as Gwar Alltyfron in the apportionments, with the details on the Tithe map appearing in the parish of Llanynys and in the county named as Breconshire. 

Extract from the apportionments

Therefore, the name this hill is now listed by in the Trichant – The 300m Hills of Wales is Gwar Alltyfron and this was derived from the Tithe map. 

 

The full details for the hill are: 

Group:  Mynydd Epynt 

Name:  Gwar Alltyfron 

Previously Listed Name:  Bryn y Pantyblodau 

OS 1:50,000 map:  147

Summit Height:  339.4m (LIDAR)                                                           

Summit Grid Reference:  SN 99816 49454 (LIDAR) 

Bwlch Height:  313.6m (LIDAR) 

Bwlch Grid Reference:  SN 99619 49151 (LIDAR) 

Drop:  25.8m (LIDAR) 

 

Myrddyn Phillips (June 2024)




Mapping Mountains - Significant Name Changes - Y Trichant - The 300m Hills of Wales

Pt. 364.9m (SN 901 346) - 251st significant name change

Summit Relocations post for Pt. 364.9m

 

There has been a Significant Name Change to a hill that is listed in the Y Trichant – The 300m Hills of Waleswith the summit height, bwlch height and their locations, the drop and status of the hill derived from LIDAR analysis conducted by Myrddyn Phillips. 

LIDAR image of Pt. 364.9m (SN 901 346)

The criteria for the list that this name change applies to are:

Y Trichant – The 300m Hills of Wales – Welsh hills at or above 300m and below 400m in height that have 30m minimum drop, with an accompanying sub list entitled the Sub-Trichant, with the criteria for this sub category being all Welsh hills at or above 300m and below 400m in height with 20m or more and below 30m of drop.  The list is authored by Myrddyn Phillips with the Introduction to the list and the renaming of it appearing on Mapping Mountains on the 13th May 2017, and the Introduction to the Mapping Mountains publication of the list appearing on the 1st January 2022. 

Y Trichant - The 300m Hills of Wales by Myrddyn Phillips

The hill is adjoined to the Mynydd Epynt group of hills, which are situated in the central part of South Wales (Region B, Sub-Region B1), and it is positioned encircled by minor roads, with the A40 road farther to its south, and has the village of Pontsenni (Sennybridge) towards the south south-east.

The hill appeared in the original 300m height band of Welsh P30 hills published on Geoff Crowder’s v-g.me website, under the invented and transposed name of Twyn y Neuadd, with an accompanying note stating; Name from buildings and wood to the South.


Twyn y Neuadd364mSN902346160188Name from buildings and wood to the South


During my early hill listing I thought it appropriate to either invent a name for a hill, or use a name that appeared near to the summit of the hill on Ordnance Survey maps of the day.  My preference was to use farm names and put PenBryn or Moel in front of them or as in this instance transpose the name of a wood and farm and add the words Twyn y to it.  This is not a practice that I now advocate as with time and inclination place-name data can be improved either by asking local people or by examining historic documents, through this form of research an appropriate name for the hill can usually be found. 

Extract from the Ordnance Survey 1:25,000 Explorer map

However, on occasion even when research is conducted an appropriate name for the hill may not be found, and on such occasions the listing protocol is to use the point (Pt. 364.9) notation, and for this hill this is such an example.

Therefore, the name this hill is now listed by in the Trichant – The 300m Hills of Wales is Pt. 364.9m, and this is being used as the author has not found an appropriate name for the hill either through historic research and/or local enquiry. 

 

The full details for the hill are: 

Group:  Mynydd Epynt 

Name:  Pt. 364.9m 

Previously Listed Name:  Twyn y Neuadd 

OS 1:50,000 map:  160

Summit Height:  364.9m (LIDAR)                                                           

Summit Grid Reference:  SN 90152 34612 (LIDAR)                                        

Bwlch Height:  339.0m (LIDAR) 

Bwlch Grid Reference:  SN 90131 34941 (LIDAR) 

Drop:  25.9m (LIDAR) 

 

Myrddyn Phillips (June 2024)




Mapping Mountains - Significant Name Changes - Y Trichant - The 300m Hills of Wales

Llan Ucha Nantgwared (SN 878 316) - 250th significant name change

 

There has been a Significant Name Change to a hill that is listed in the Y Trichant – The 300m Hills of Waleswith the summit height, bwlch height and their locations, the drop and status of the hill derived from LIDAR analysis conducted by Myrddyn Phillips. 

LIDAR image of Llan Ucha Nantgwared (SN 878 316)

The criteria for the list that this name change applies to are:

Y Trichant – The 300m Hills of Wales – Welsh hills at or above 300m and below 400m in height that have 30m minimum drop, with an accompanying sub list entitled the Sub-Trichant, with the criteria for this sub category being all Welsh hills at or above 300m and below 400m in height with 20m or more and below 30m of drop.  The list is authored by Myrddyn Phillips with the Introduction to the list and the renaming of it appearing on Mapping Mountains on the 13th May 2017, and the Introduction to the Mapping Mountains publication of the list appearing on the 1st January 2022. 

Y Trichant - The 300m Hills of Wales by Myrddyn Phillips

The hill is adjoined to the Mynydd Epynt group of hills, which are situated in the central part of South Wales (Region B, Sub-Region B1), and it is positioned with minor roads to its west and south, and the A40 road farther to its south-west, and has the village of Pontsenni (Sennybridge) towards the south-east.

The hill appeared in the original 300m height band of Welsh P30 hills published on Geoff Crowder’s v-g.me website, under the transposed name of Twyn y Wern, with an accompanying note stating; Name from hill to the North.


Twyn y Wern380cSN87831616012Name from hill to the North


During my early hill listing I thought it appropriate to either invent a name for a hill, or use a name that appeared near to the summit of the hill on Ordnance Survey maps of the day.  My preference was to use farm names and put PenBryn or Moel in front of them or as in this instance transpose a name of a different hill and use it for that of this hill.  This is not a practice that I now advocate as with time and inclination place-name data can be improved either by asking local people or by examining historic documents, through this form of research an appropriate name for the hill can usually be found. 

Extract from the Ordnance Survey 1:25,000 Explorer map

As the summit of this hill comprises bounded land the details for it were examined on the Tithe map.  The term Tithe map is generally given to a map of a Welsh or English parish or township and which was prepared after the 1836 Tithe Commutation Act.  This act allowed tithes to be paid in cash rather than goods.  The Tithe maps gave names of owners and occupiers of land in each parish and importantly for place-name research they also included the name of enclosed land.  This enclosed land is usually based on a field system, however not every field is given a name, but many are and especially so in Wales. 

Extract from the Tithe map

The enclosed land where the summit of this hill is situated is given the number 490 on the Tithe map, this can be cross referenced against the apportionments; it is these apportionments that give the name of the owner or occupier of the land as well as the name of the land.  The land where the summit of this hill is situated is named as Llan Ucha (of the farm) Nantgwared in the apportionments, with the details on the Tithe map appearing in the parish of Llywel and in the county named as Brecon. 

Extract from the apportionments

Therefore, the name this hill is now listed by in the Trichant – The 300m Hills of Wales is Llan Ucha Nantgwared and this was derived from the Tithe map. 

 

The full details for the hill are: 

Group:  Mynydd Epynt 

Name:  Llan Ucha Nantgwared 

Previously Listed Name:  Twyn y Wern 

OS 1:50,000 map:  160

Summit Height:  380.7m (LIDAR)                                                           

Summit Grid Reference:  SN 87891 31661 & SN 87886 31671 (LIDAR) 

Bwlch Height:  354.9m (LIDAR) 

Bwlch Grid Reference:  SN 88002 32543 (LIDAR) 

Drop:  25.8m (LIDAR) 

 

Myrddyn Phillips (May 2024) 




Mapping Mountains - Significant Name Changes - Y Trichant - The 300m Hills of Wales

Lletwith (SN 865 405) - 249th significant name change

Hill Reclassifications post for Lletwith

 

There has been a Significant Name Change to a hill that is listed in the Y Trichant – The 300m Hills of Waleswith the summit height, bwlch height and their locations, the drop and status of the hill derived from LIDAR analysis conducted by Myrddyn Phillips. 

LIDAR image of Lletwith (SN 865 405)

The criteria for the list that this name change applies to are:

Y Trichant – The 300m Hills of Wales – Welsh hills at or above 300m and below 400m in height that have 30m minimum drop, with an accompanying sub list entitled the Sub-Trichant, with the criteria for this sub category being all Welsh hills at or above 300m and below 400m in height with 20m or more and below 30m of drop.  The list is authored by Myrddyn Phillips with the Introduction to the list and the renaming of it appearing on Mapping Mountains on the 13th May 2017, and the Introduction to the Mapping Mountains publication of the list appearing on the 1st January 2022. 

Y Trichant - The 300m Hills of Wales by Myrddyn Phillips

The hill is adjoined to the Mynydd Epynt group of hills, which are situated in the central part of South Wales (Region B, Sub-Region B1), and it is positioned with minor roads to its north, west and east, and the A483 road farther to its north-west, and has the town of Llanymddfri (Llandovery) towards the south-west.

When the original 300m height band of Welsh P30 hills were published on Geoff Crowder’s v-g.me website, this hill was not included in the Hills to be surveyed sub list, as it was considered not to meet the criteria then used for this sub category.

After the sub list was standardised, and interpolated heights and drop values also included the details for this hill were re-evaluated and it was listed under the point (Pt. 335m) notation with 22m of drop, based on the 335m summit spot height that appears on the contemporary Ordnance Survey 1:25,000 Explorer map and the 313m bwlch spot height that appeared on the Ordnance Survey Vector Map Local hosted on the Geograph website and which was entitled the Interactive Coverage Map. 

Extract from the Ordnance Survey 1:25,000 Explorer map

As the summit of this hill comprises bounded land the details for it were examined on the Tithe map.  The term Tithe map is generally given to a map of a Welsh or English parish or township and which was prepared after the 1836 Tithe Commutation Act.  This act allowed tithes to be paid in cash rather than goods.  The Tithe maps gave names of owners and occupiers of land in each parish and importantly for place-name research they also included the name of enclosed land.  This enclosed land is usually based on a field system, however not every field is given a name, but many are and especially so in Wales. 

Extract from the Tithe map

The enclosed land where the summit of this hill is situated is given the number 9 on the Tithe map, this can be cross referenced against the apportionments; it is these apportionments that give the name of the owner or occupier of the land as well as the name of the land.  The land where the summit of this hill is situated is named as a part of the lands associated with the farm of Lletwith in the apportionments, with the details on the Tithe map appearing in the parish of Llanddulus and in the county named as Brecknock. 

Extract from the apportionments

Therefore, the name this hill is now listed by in the Trichant – The 300m Hills of Wales is Lletwith and this was derived from the Tithe map. 

 

The full details for the hill are: 

Group:  Mynydd Epynt 

Name:  Lletwith 

Previously Listed Name:  Pt. 335m 

OS 1:50,000 map:  147, 160

Summit Height:  335.3m (LIDAR)                                                           

Summit Grid Reference:  SN 86562 40517 & SN 86560 40522 & SN 86564 40525 (LIDAR) 

Bwlch Height:  310.7m (LIDAR) 

Bwlch Grid Reference:  SN 86110 40186 (LIDAR) 

Drop:  24.6m (LIDAR) 

 

Myrddyn Phillips (May 2024)

 



Mapping Mountains - Significant Name Changes - Y Trichant - The 300m Hills of Wales

Pt. 391.2m (SN 856 386) - 248th significant name change

 

There has been a Significant Name Change to a hill that is listed in the Y Trichant – The 300m Hills of Waleswith the summit height, bwlch height and their locations, the drop and status of the hill derived from LIDAR analysis conducted by Myrddyn Phillips. 

LIDAR image of Pt. 391.2m (SN 856 386)

The criteria for the list that this name change applies to are:

Y Trichant – The 300m Hills of Wales – Welsh hills at or above 300m and below 400m in height that have 30m minimum drop, with an accompanying sub list entitled the Sub-Trichant, with the criteria for this sub category being all Welsh hills at or above 300m and below 400m in height with 20m or more and below 30m of drop.  The list is authored by Myrddyn Phillips with the Introduction to the list and the renaming of it appearing on Mapping Mountains on the 13th May 2017, and the Introduction to the Mapping Mountains publication of the list appearing on the 1st January 2022. 

Y Trichant - The 300m Hills of Wales by Myrddyn Phillips

The hill is adjoined to the Mynydd Epynt group of hills, which are situated in the central part of South Wales (Region B, Sub-Region B1), and it is positioned with minor roads to its north and south, and the A483 road to its north-west, and has the town of Llanwrtyd towards the north north-east.

The hill appeared in the original 300m height band of Welsh P30 hills published on Geoff Crowder’s v-g.me website, under the invented and transposed name of Bryn Cefn Coch, with an accompanying note stating; Name from buildings to the North.


Bryn Cefn Coch391mSN857386160187Height from 1985 1:50000 map. Name from buildings to the North


During my early hill listing I thought it appropriate to either invent a name for a hill, or use a name that appeared near to the summit of the hill on Ordnance Survey maps of the day.  My preference was to use farm names and put PenBryn or Moel in front of them.  This is not a practice that I now advocate as with time and inclination place-name data can be improved either by asking local people or by examining historic documents, through this form of research an appropriate name for the hill can usually be found.

Extract from the Ordnance Survey 1:50,000 Landranger map

However, on occasion even when research is conducted an appropriate name for the hill may not be found, and on such occasions the listing protocol is to use the point (Pt. 391.2) notation, and for this hill this is such an example.

Therefore, the name this hill is now listed by in the Trichant – The 300m Hills of Wales is Pt. 391.2m, and this is being used as the author has not found an appropriate name for the hill either through historic research and/or local enquiry. 

 

The full details for the hill are: 

Group:  Mynydd Epynt 

Name:  Pt. 391.2m 

Previously Listed Name:  Bryn Cefn Coch 

OS 1:50,000 map:  160

Summit Height:  391.2m (LIDAR)                                                           

Summit Grid Reference:  SN 85642 38637 (LIDAR) 

Bwlch Height:  320.2m (LIDAR) 

Bwlch Grid Reference:  SN 86702 38910 (LIDAR) 

Drop:  71.0m (LIDAR) 

 

Myrddyn Phillips (April 2024)




Mapping Mountains - Significant Name Changes - Y Trichant - The 300m Hills of Wales

Llanfilo Camp (SO 113 327) - 247th significant name change

Significant Height Revisions post for Llanfilo Camp

Summit Relocations post for Llanfilo Camp

 

There has been a Significant Name Change to a hill that is listed in the Y Trichant – The 300m Hills of Waleswith the summit height, bwlch height and their locations, the drop and status of the hill derived from LIDAR analysis conducted by Myrddyn Phillips. 

LIDAR image of Llanfilo Camp (SO 113 327)

The criteria for the list that this name change applies to are:

Y Trichant – The 300m Hills of Wales – Welsh hills at or above 300m and below 400m in height that have 30m minimum drop, with an accompanying sub list entitled the Sub-Trichant, with the criteria for this sub category being all Welsh hills at or above 300m and below 400m in height with 20m or more and below 30m of drop.  The list is authored by Myrddyn Phillips with the Introduction to the list and the renaming of it appearing on Mapping Mountains on the 13th May 2017, and the Introduction to the Mapping Mountains publication of the list appearing on the 1st January 2022. 

Y Trichant - The 300m Hills of Wales by Myrddyn Phillips

The hill is adjoined to the Mynydd Epynt group of hills, which are situated in the central part of South Wales (Region B, Sub-Region B1), and it is positioned encircled by minor roads, with the A38 road farther to its north and the B4560 road farther to its east, and has the town of Talgarth towards the east north-east.

The hill appeared in the original 300m height band of Welsh P30 hills published on Geoff Crowder’s v-g.me website, under the invented name of Pen-y-gaer, with an accompanying note stating; Name from ancient hill fort at summit.


Pen-y-gaer310mSO11332716113Trig pillar. Name from ancient hill fort at summit


During my early hill listing I thought it appropriate to either invent a name for a hill, or use a name that appeared near to the summit of the hill on Ordnance Survey maps of the day.  My preference was to use farm names and put PenBryn or Moel in front of them or as in this instance use a name that is in common usage for such ancient monuments, without confirmation of its actual use.  This is not a practice that I now advocate as with time and inclination place-name data can be improved either by asking local people or by examining historic documents, through this form of research an appropriate name for the hill can usually be found. 

Extract from the Ordnance Survey 1:25,000 Explorer map

Since the original publication of the Welsh P30 lists on Geoff Crowder’s v-g.me website there have been a number of resources made available online.  One of these is Coflein; the online database for the National Monuments Record of Wales, which constitutes the national collection about the historic environment of Wales.  Coflein documents detail associated with ancient structures, including hill forts, and for this hill and its listed name it is Coflein that use the name of Llanfilo Camp.

Therefore, the name this hill is now listed by in the Trichant – The 300m Hills of Wales is Llanfilo Camp and this was derived from detail supplied by Coflein. 

 

The full details for the hill are: 

Group:  Mynydd Epynt 

Name:  Llanfilo Camp 

Previously Listed Name:  Pen-y-gaer 

OS 1:50,000 map:  161

Summit Height:  310.4m (LIDAR)                                                           

Summit Grid Reference:  SO 11352 32709 (LIDAR) 

Bwlch Height:  223.6m (LIDAR) 

Bwlch Grid Reference:  SO 09879 31998 (LIDAR) 

Drop:  86.8m (LIDAR) 

 

Myrddyn Phillips (April 2024) 




Mapping Mountains - Significant Name Changes - Y Trichant - The 300m Hills of Wales

Mynydd Allt y Grug (SN 753 081) - 246th significant name change

 

There has been a Significant Name Change to a hill that is listed in the Y Trichant – The 300m Hills of Waleswith the summit height, bwlch height and their locations, the drop and status of the hill derived from LIDAR analysis conducted by Myrddyn Phillips. 

LIDAR image of Mynydd Allt y Grug (SN 753 081)

The criteria for the list that this name change applies to are:

Y Trichant – The 300m Hills of Wales – Welsh hills at or above 300m and below 400m in height that have 30m minimum drop, with an accompanying sub list entitled the Sub-Trichant, with the criteria for this sub category being all Welsh hills at or above 300m and below 400m in height with 20m or more and below 30m of drop.  The list is authored by Myrddyn Phillips with the Introduction to the list and the renaming of it appearing on Mapping Mountains on the 13th May 2017, and the Introduction to the Mapping Mountains publication of the list appearing on the 1st January 2022. 

Y Trichant - The 300m Hills of Wales by Myrddyn Phillips

The hill is adjoined to the Mynydd Du group of hills, which are situated in the southern part of South Wales (Region B, Sub-Region B5), and it is positioned with a minor road to its north-west, the A474 road farther to its west, the A4067 road to its south-east and the A4068 road to its north-east, and has the town of Pontadawe towards south-west. 

Extract from the Ordnance Survey 1:25,000 Explorer map

The hill appeared in the original 300m height band of Welsh P30 hills published on Geoff Crowder’s v-g.me website as a twin listed top with the prioritised name given as Tarren y Gigfran, although both this and that of Mynydd Allt-y-grug were given as twin names.


Tarren y Gigfran/ Mynydd Allt-y-grug338mSN75308116012/165Two tops of same height - other at SN750079.


Since the original publication of the Welsh P30 lists on Geoff Crowder’s v-g.me website there have been a number of maps made available online.  Some of these are historic such as the series of Six-Inch maps on the National Library of Scotland website.  Whilst others were digitally updated such as the Ordnance Survey Vector Map Local that was hosted on the Geograph website and which was entitled the Interactive Coverage Map, whilst others are current and digitally updated such as the interactive mapping on the Magic Maps and WalkLakes websites, and it is the series of Ordnance Survey Six-Inch maps that form the basis of the change in the listed name of this hill.

The Ordnance Survey series of Six-Inch maps formed the base map Ordnance Survey used for many decades leading to the production of the 1:10,000 Series of maps, both have now been superseded by the digitised Master Map.  The series of Six-Inch maps are excellent for name placement and especially so compared to the contemporary Ordnance Survey 1:25,000 Explorer map, and it is the series of Six-Inch maps that prioritise the name of Mynydd Allt y Grug for this hill, with that of Tarren y Gigfran positioned against a small escarpment edge and therefore a feature name, rather than a hill name.

Extract from the Ordnance Survey series of Six-Inch maps

Therefore, the name this hill is now listed by in the Trichant – The 300m Hills of Wales is Mynydd Allt y Grug and this was derived from contemporary Ordnance Survey maps and priority status of the name ascertained from the Ordnance Survey series of Six-Inch maps. 

 

The full details for the hill are: 

Group:  Mynydd Du 

Name:  Mynydd Allt y Grug 

Previously Listed Name:  Tarren y Gigfran/Mynydd Allt-y-grug 

OS 1:50,000 map:  160

Summit Height:  338.8m (LIDAR)                                                           

Summit Grid Reference:  SN 75325 08135 (LIDAR) 

Bwlch Height:  148.4m (LIDAR) 

Bwlch Grid Reference:  SN 75768 10169 & SN 75783 10170 (LIDAR) 

Drop:  190.4m (LIDAR) 

 

Myrddyn Phillips (April 2024)



No comments:

Post a Comment