Wednesday, 30 June 2021

Mapping Mountains – Significant Name Changes – The Welsh P15s


Tan yr Allt (SH 320 837) 

There has been a Significant Name Change to a hill that is listed in The Welsh P15s, with the summit height, bwlch height and their locations, the drop and status of the hill confirmed by LIDAR analysis conducted by Myrddyn Phillips. 

LIDAR image of Tan yr Allt (SH 320 837)

The criteria for the list that this name change applies to are:

The Welsh P15s – Welsh hills with 15m minimum drop, irrespective of their height, with an accompanying sub list entitled the Welsh Sub-P15s, with the criteria for this sub category being all Welsh hills with 14m or more and below 15m of drop.  The list is authored by Myrddyn Phillips, with the Introduction to the list appearing on Mapping Mountains on the 10th May 2019. 

The Welsh P15s by Myrddyn Phillips

The hill is adjoined to the Ynys Môn group of hills, which are situated in the north-western part of North Wales (Region A, Sub-Region A1), and it is positioned with minor roads to its north, south and east, and the A5025 road to its west, and has the village of Llanfachreth towards the south south-west. 

When the listing that became known as The Welsh P15s was being compiled, this hill was listed under the point (Pt. c 40m) notation with an estimated c 17m of drop, based on an estimated c 40m summit height and an estimated c 23m bwlch height, with both heights based on interpolation of 5m contouring that appears on the Ordnance Survey 1:25,000 Explorer map. 

Extract from the Ordnance Survey 1:25,000 Explorer map

As the summit of this hill comprises bounded land the details for it were examined on the Tithe map.  The term Tithe map is generally given to a map of a Welsh or English parish or township and which was prepared after the 1836 Tithe Commutation Act.  This act allowed tithes to be paid in cash rather than goods.  The Tithe maps gave names of owners and occupiers of land in each parish and importantly for place-name research they also included the name of enclosed land.  This enclosed land is usually based on a field system, however not every field is given a name, but many are and especially so in Wales. 

Extract from the Tithe map

The enclosed land where the summit of this hill is situated is given the number 14 on the Tithe map, this can be cross referenced against the apportionments; it is these apportionments that give the name of the owner or occupier of the land as well as the name of the land.  The land where the summit of this hill is situated is named as Tan yr Allt in the apportionments, with the details on the Tithe map appearing in the parish of Llanfachreth and in the county named as Anglesey. 

Extract from the apportionments

Therefore, the name this hill is listed by in The Welsh P15s is Tan yr Allt and this was derived from the Tithe map. 

 

The full details for the hill are: 

Group:  Ynys Môn 

Name:  Tan yr Allt

Previously Listed Name:  Pt. c 40m 

OS 1:50,000 map:  114

Summit Height:  39.7m (LIDAR)                                                           

Summit Grid Reference:  SH 32069 83702 (LIDAR) 

Bwlch Height:  24.0m (LIDAR) 

Bwlch Grid Reference:  SH 32344 83807 (LIDAR) 

Drop:  15.7m (LIDAR) 

 

Myrddyn Phillips (June 2021)

 

 

 

  

Mapping Mountains – Trimble Surveys – Beacon Hill

 

22.04.21  Rhos Crug (SO 167 743), Pool Hill (SO 177 753), Cnwch Bank (SO 178 746), Pt. 487.8m (SO 184 751), Beacon Hill (SO 176 767) and Stanky Hill (SO 163 764) 

Beacon Hill (SO 176 767)

Seasonal change can bring beauty to the hills, be it the greens and warmth of summer merging to autumn’s chilled morning’s and coloured display or this then turning in to the deadened winter months.  The merging in to spring is always welcome when that first seasonal warmth heralds new growth and when walking in the hills winter gear is dispensed in preference for short sleeved tops and shorts.  Although winter can bring magical days when new crisply laden snow is almost ethereal in nature, its passing in to spring brings radiance with longer daylight hours and the strengthening of the sun.  And today, with ever present blue skies above, welcome warmth offset by a cooling breeze and the constant background sound of serenading Skylarks, there were few other places that I would prefer to be other than on the Radnorshire hills. 

The higher Radnorshire hills are moorland in nature, with heather and rough grass dominating.  However, many of these hills have good tracks and paths leading between them and in many instances to their summits.  They are in the main open hills, with few fences enclosing their land.  And with that ever present song of Skylarks chirping against a brisk early morning breeze with an unadulterated blue sky above and no one else on the hill; today I could not imagine any other place so welcoming and giving tranquillity and peace of mind. 

Today I had a circuit of six hills planned, with each summit and many of their connecting bylchau to survey.  I’d visited four of these hills before, but not as a combined walk.  The highest; Beacon Hill I had last visited in 2005, and prior to this only once before in 2000. 

I was parked to the west of my first hill of the day; Rhos Crug, and walking up the narrow lane leading north by 8.20am.  Rhos Crug is easily identified from its surrounding hills as it has the remains of two distinctive ancient tumuli on the area of its summit, and as I walked up the lane these and the hill they are a part of rose above the valley and the River Aran which gently flowed down valley below me.  I soon headed down to the river, which at this point is no more than a stream and found a crossing place before quietly making my way up through pastured fields where lambs scampered in the early morning sunshine. 

Looking toward Fforest Glud from the ascent of Rhos Crug

The pastured fields gave way at a fence boundary to the upper part of the hill where a good track follows the western ridge of Rhos Crug ever upward toward its high point, only merging to a narrower path near its summit.  I made good progress toward the summit with its high point the top of the westerly tumulus and soon after arriving the Trimble was set up gathering data. 

Gathering data at the summit of Rhos Crug

During data collection I stood below the tumulus and looked out on the moorland surrounds and wondered how much of my onward route would be through rough grass and heather.  I also picked out the next two survey points, each a contender for this hill’s bwlch position and after the Trimble had gathered its allotted summit data I sauntered back down the narrow path toward a dried pool which constitutes one of the potential bwlch positions. 

Gathering data at the first of two positions surveyed for the bwlch of Rhos Crug

Having gathered the allotted data beside the dried up pool I wandered over grass and between clumps of heather to the continuation of the ridge that connects Rhos Crug with its higher neighbours of Pool Hill and Beacon Hill.  This route now consisted of what for these hills is one of the main earthen tracks.  The second point surveyed for the bwlch position of Rhos Crug was just to the south of this rack.  Progress was being made but there were still many summits and bylchau to survey. 

Gathering data at the second of two positions surveyed for the bwlch of Rhos Crug

My next objective was the summit of Pool Hill which from this direction looked a bulk of a moorland hill with little weakness, with it protected by moor grass and heather, but again one of the beauty of these hills are the tracks and paths leading from one to another, and approaching the summit of Pool Hill from the direction of Rhos Crug was a relatively easy affair. 

Rhos Crug and the source of the River Lugg

The summit of Pool Hill consists of a large patch of closely cropped grass which is at contrast with its moorland surrounds.  The Trimble was soon set up gathering data.  During data collection I basked in the morning sunshine and looked back on my inward route and that of the route ahead. 

Gathering data at the summit of Pool Hill

My next two hills lay in the opposite direction to the main continuation of this walk toward Beacon Hill, one lay directly to the south of the summit of Pool Hill and the other toward the east, both are listed as 400m Sub-Pedwar hills and I had not visited either. 

The route down from Pool Hill toward the bwlch connecting with the first of these two hills; the 499m map heighted Cnwch Bank could easily have been rough, but it wasn’t.  Tracks, paths and moor grass led between the heathered slopes down to the connecting bwlch.  The area of the bwlch after prolonged rain would no doubt be an uninviting boggy realm, but today the moor grass was crisp and dry.  The land hereabouts is quite wild, although it does have another one of the arterial routes between these hills crossing over it. 

Gathering data at the bwlch of Cnwch Bank

The bwlch and summit of Cnwch Bank had previously been LIDARed by Aled.  I had for many years wanted to visit this hill as its map height is a tantalising 1m below the 500m height and today after surveying its bwlch I followed sheep paths up its heathered slopes to its summit. 

The connection between Pool Hill and Cnwch Bank was the roughest underfoot conditions I experienced during the day, but this was never difficult.  The ground was dry and the moor grass crisp and the going relatively easy. 

Gathering data at the summit of Cnwch Bank

Once summit data were gathered and stored I left Cnwch Bank and retraced my route back to its connecting bwlch and followed the path north-eastward toward the next bwlch that connects with the second 400m Sub-Pedwar, which remains unnamed on the map.  As I crossed the bwlch I quickly assessed the lay of land and decided to press on to its summit, leaving the bwlch survey for my return. 

The summit of this hill was relatively easy to pinpoint and as the Trimble gathered data I watched a tractor chug up the track leading to Beacon Lodge, which is positioned close to a conifer plantation taking in much of the southerly domain of this hill.  The tractor disappeared around a corner and that was the only other human movement I saw on these hills during the day.  I always find meeting a fellow hill walker welcome when on the hill, even if only a wave of recognition is given, it is an acknowledgement toward someone of like mind, greetings and conversation are again always welcome, but it is also a pleasure to be on a hill and not meet or see another person, this form of fleeting solitude brings a perverse sense of contentedness and comfort. 

Gathering data at the summit of Pt. 487.8m (SO 184 751)

I was soon back at the connecting bwlch and having picked my preferred position for its critical point I set the Trimble up and listened as it quietly beeped away collecting its individual datum points.  This bwlch is placed close to another one of the main tracks that head through these hills, but whereas the tracks from earlier in the walk were earthen and green, this one was gravelled and its route was easy to follow as it meandered above the upper reaches of Lawn Brook toward the hill named as Fron Rocks on contemporary Ordnance Survey maps. 

Gathering data at the bwlch of Pt. 487.8m (SO 184 751)

Once the Trimble had gathered and stored the allotted data I joined the gravelled track and followed it toward the eastern flank of Beacon Hill, only diverting from it to explore the connecting bwlch of Pool Hill.  I had thoughts that this bwlch would consist of a large moorland bog, but in reality it was a short walk on closely cropped grass to another dried up pool.  This was the last bwlch survey of the day and as the Trimble gathered data I sat and looked up at Beacon Hill and marvelled at the blue sky above, which from this position was now a deeply rich colour. 

The track leading toward Beacon Hill

Gathering data at the bwlch of Pool Hill

During much of this walk the song of the Skylark accompanied me.  These little birds are a delight during spring time.  They flutter and chirp against a blue and radiant sky bringing solace to wearied legs.  Whilst sitting on a clump of grass scribbling all necessary details in my surveying notebook as the Trimble gathered its last bwlch data set of the day, I looked up and watched one of these little birds as it sang.  Its wings flapped against the breeze and its song pieced the quiet surrounds and gave such a beautiful background sound to the day. 

I was nearing the end of the walk, but still had two summit surveys to conduct and having left the connecting bwlch of Pool Hill I re-joined the gravelled track for a short distance as it began to gain height, only leaving it in preference for a green track that headed up toward the summit of Beacon Hill. 

Once at the summit I positioned the Trimble on top of my rucksack with its internal antenna aligned with the highest ground which is about 1 metre from the base of the triangulation pillar that marks the summit of Beacon Hill.  Then after measuring the offset to the ground at its base I waited for the 0.1m accuracy level to be attained before data should be logged and once the equipment was activated to gather data, I again sat and soaked in my surrounds.  It was good to be back on this hill after a sixteen year interval. 

Gathering data at the summit of Beacon Hill

All that remained was the summit survey of Stanky Hill; which I had surveyed on two previous occasions, once with my old basic levelling staff and the second with John, Graham and Aled when we gathered data with the Leica 530 and also line surveyed the hill for drop.  This time I wanted to Trimble the summit. 

Leaving the summit of Beacon Hill I followed a good path down to its connecting bwlch with Stanky Hill and then continued up to the last summit of the day.  When we had gathered data from this summit with the Leica 530 we positioned the equipment on an area of loose stones close to a small pool.  I knew where this position was, but when I arrived I examined the surrounding land and compared this position to that of a small grassed hummock that when I stood on its top, was solid.  This small grassed hummock was higher than the position where Leica data had previously been gathered, the grassed hummock was solid, natural and definitely a part of the hill and therefore it was where I positioned the Trimble to gather summit data. 

Gathering data at the summit of Stanky Hill

Once the allotted data were gathered and stored, I packed the equipment away and descended the south-westerly slopes of Stanky Hill, veering eastward to join the main greened path heading down toward Rhydhir farm. 

Beacon Hill from the descent of Stanky Hill

By now the chilled morning breeze had been replaced by afternoon warmth and by the time I arrived in the farmyard at Rhydhir I was looking forward to a few minutes rest.  This soon turned in to a welcome 20 minutes, as I met Roy and Mair Wilson and their son; Rhys, a lovely family more than welcome to give their time to a stranger who had just turned up at their home. 

Rhys, Mair and Roy Wilson of Rhydhir farm

Local farmers are usually a hive of information and we chatted about the hills and their names and also names of lower places, all around the valley that Roy and Mair call home.  It was a delight to meet them at the end of this walk and having thanked them for their time I headed toward the narrow paved lane that wound its way back to my car. 

 

Survey Result: 

 

Rhos Crug

Summit Height:  508.9m (converted to OSGM15)

Summit Grid Reference:  SO 16712 74388 

Bwlch Height:  488.5m (converted to OSGM15)

Bwlch Grid Reference:  SO 16625 74662

Drop:  20.4m

Dominance:  4.01%


 

 

Pool Hill

Summit Height:  514.9m (converted to OSGM15)

Summit Grid Reference:  SO 17726 75373 

Bwlch Height:  450.6m (converted to OSGM15)

Bwlch Grid Reference:  SO 17761 76003

Drop:  64.3m

Dominance:  12.48%


 

 

Cnwch Bank

Summit Height:  499.2m (converted to OSGM15)

Summit Grid Reference:  SO 17876 74628 

Bwlch Height:  473.6m (converted to OSGM15)

Bwlch Grid Reference:  SO 17840 74933

Drop:  25.6m

Dominance:  5.12%


 

 

Pt. 487.8m

Summit Height:  487.8m (converted to OSGM15)

Summit Grid Reference:  SO 18492 75116 

Bwlch Height:  465.8m (converted to OSGM15)

Bwlch Grid Reference:  SO 18226 75154

Drop:  22.0m

Dominance:  4.51%


 

 

Beacon Hill

Summit Height:  547.6m (converted to OSGM15)

Summit Grid Reference:  SO 17644 76792 

Bwlch Height:  368.0m (LIDAR)

Bwlch Grid Reference:  SO 07104 84228 (LIDAR)

Drop:  179.6m (Trimble GeoXH 6000 summit and LIDAR bwlch)

Dominance:  32.80% (Trimble GeoXH 6000 summit and LIDAR bwlch)


 

 

Stanky Hill

Summit Height:  506.9m (converted to OSGM15, Trimble GeoXH 6000)

Summit Grid Reference:  SO 16394 76419 (Trimble GeoXH 6000) 

Bwlch Height:  476.4m (converted to OSGM15, Leica 530)

Bwlch Grid Reference:  SO 16861 76416 (Leica 530)

Drop:  30.5m (Trimble GeoXH 6000 summit and Leica 530 bwlch) (Dewey addition)

Dominance:  6.02% (Trimble GeoXH 6000 summit and Leica 530 bwlch)

 

 

 

For further details please consult the Trimble Survey Spreadsheet

Tuesday, 29 June 2021

Mapping Mountains – Hill Reclassifications – 30-99m Twmpau

 

Teilia (SH 381 941) – 30-99m Sub-Twmpau addition

There has been an addition to the list of 30-99m Twmpau, with the summit height, bwlch height and their locations, the drop and status of the hill derived from detail on contemporary maps produced from Ordnance Survey data and mapping on the Magic Maps website. 

The criteria for the list that this addition applies to are: 

30-99m Twmpau – Welsh hills at or above 30m and below 100m in height that have 30m minimum drop, with an accompanying sub list entitled the 30-99m Sub-Twmpau with the criteria for this sub category being all Welsh hills at or above 30m and below 100m in height with 20m or more and below 30m of drop, with the word Twmpau being an acronym standing for thirty welsh metre prominences and upward. 

The 30-99m Twmpau by Myrddyn Phillips

The name the hill is listed by is Teilia and this was derived from the Tithe map and it is adjoined to the Ynys Môn group of hills, which are situated in the north-western part of North Wales (Region A, Sub-Region A1), and it is positioned with the coast to its north and west, minor roads also to its north and west and the A5025 road to its south, and has the village of Cemaes towards the south-west. 

When the original 30-99m height band of Welsh P30 hills were published on Geoff Crowder’s v-g.me website this hill was not included in the Hills to be surveyed sub list, as it was considered not to meet the criteria then used for this sub category. 

After the sub list was standardised, and interpolated heights and drop values also included the details for this hill were re-evaluated and it was listed with an estimated c 23m of drop based on an estimated c 51m summit height and an estimated c 28m bwlch height, with both heights based on interpolation of 5m contouring that appear on the Ordnance Survey 1:25,000 Explorer map. 

Extract from the Ordnance Survey 1:25,000 Explorer map

Since the original publication of the P30 lists on Geoff Crowder’s v-g.me website and the re-assessment of this hill’s details there have been a number of Ordnance Survey maps made available online, some of these are historic such as the series of Six-Inch maps on the National Library of Scotland website, whilst others are current and digitally updated such as the mapping on the Magic Maps website. 

One of the mapping resources now available online is the Magic Maps website which hosts an interactive map originated from Ordnance Survey data.  This mapping has many spot heights not on other publicly available Ordnance Survey maps and for this hill a 51m summit spot height is given on the area of its summit. 

Extract from the Magig Maps website

Therefore, the addition of this hill to 30-99m Sub-Twmpau status is due to detail on contemporary maps produced from Ordnance Survey data, resulting in a 51m summit height and an estimated c 28m bwlch height, with these values giving this hill an estimated c 23m of drop, which is sufficient for it to be classified as a 30-99m Sub-Twmpau. 

 

The full details for the hill are: 

Group:  Ynys Môn 

Name:  Teilia 

OS 1:50,000 map:  114

Summit Height:  51m (spot height) 

Summit Grid Reference:  SH 38125 94148 (spot height) 

Bwlch Height:  c 28m (interpolation) 

Bwlch Grid Reference:  SH 38469 94108 (interpolation) 

Drop:  c 23m (spot height summit and interpolated bwlch) 

 

Myrddyn Phillips (June 2021)

 

 

 

 

 

 

Mapping Mountains – Significant Name Changes – 100m Twmpau

 

Pt. 170.7m (SJ 193 018) 

There has been a Significant Name Change to a hill that is listed in the 100m Twmpau, with the summit height, bwlch height and their locations, the drop and status of the hill confirmed by LIDAR analysis and a subsequent Trimble GeoXH 6000 survey conducted by Myrddyn Phillips. 

Pt. 170.7m (SJ 193 018)

The criteria for the list that this name change applies to are:

100m Twmpau - Welsh hills at or above 100m and below 200m in height with 30m minimum drop, with an accompanying sub list entitled the 100m Sub-Twmpau with the criteria for this sub category being all Welsh hills at or above 100m and below 200m in height with 20m or more and below 30m of drop, with the word Twmpau being an acronym standing for thirty welsh metre prominences and upward. 

The 100m Twmpau by Myrddyn Phillips

The hill is adjoined to the Carnedd Wen group of hills which are situated in the south-eastern part of North Wales (Region A, Sub-Region A4), and it is positioned with a minor road to its north, the B4385 road to its west, the B4390 road to its south and the A483 road to its east, and has the village of Aberriw (Berriew) towards the south-west. 

When the original 100m height band of Welsh P30 hills were published on Geoff Crowder’s v-g.me website this hill was listed under the transposed name of Allt Upper, which is a prominent name that appears near the summit of this hill on the contemporary Ordnance Survey 1:25,000 Explorer map.


Allt Upper169mSJ193018136216Included by contour configuration

 

During my early hill listing I paid little regard to name placement on the map, or the meaning of names and to what feature the name was appropriately applied to.  Therefore, I prioritised names for listing purposes that I now understand are either inappropriate or where another name is viewed as being more appropriate, with the previously listed name of Allt Upper applying to a district and not necessarily to the hill itself. 

Extract from the Ordnance Survey 1:25,000 Explorer map

This is not a practice that I now advocate as with time and inclination place-name data can be improved either by asking local people or by examining historic documents, through this form of research an appropriate name for the hill can usually be found.  However, occasionally even when research is conducted an appropriate name for the hill may not be found, and on such occasions the listing protocol is to use the point (Pt. 170.7m) notation, and for this hill, this is such an example. 

Therefore, the name this hill is now listed by in the 100m Twmpau is Pt. 170.7m, and this is being used as the author has not found an appropriate name for it either through historic research and / or local enquiry. 

 

The full details for the hill are: 

Group:  Carnedd Wen 

Name:  Pt. 170.7m

Previously Listed Name:  Allt Upper 

OS 1:50,000 map:  136

Summit Height:  170.7m (converted to OSGM15, Trimble GeoXH 6000)

Summit Grid Reference:  SJ 19323 01898 (Trimble GeoXH 6000)

Bwlch Height:  132.5m (LIDAR)

Bwlch Grid Reference:  SJ 18115 01656 (LIDAR)

Drop:  38.2m (Trimble GeoXH 6000 summit and LIDAR bwlch)

 

Myrddyn Phillips (June 2021)