Cefn Uchaf (SJ 249 402)
There has been a Significant Name Change to a hill that is listed in the Y Pedwarau – The 400m Hills of Wales and Y Trichant – The 300m Hills of Wales, with the summit height, bwlch height and their locations, the drop and status of the hill derived from detail on contemporary maps produced from Ordnance Survey data.
The criteria for the two listings that this name change applies to are:
Y Pedwarau – The 400m Hills of Wales.
Welsh hills at or above 400m and below 500m in height that have 30m
minimum drop, accompanying the main Y Pedwarau list are five categories of sub
hills, with this hill being listed in the 390m Double Sub-Pedwar category. The criteria for 390m Double Sub-Pedwar
status being all Welsh hills at or above 390m and below 400m in height that
have 20m or more and below 30m of drop.
The list is co-authored by Myrddyn Phillips and Aled Williams and is
published on Mapping Mountains in Google Doc format.
Y Pedwarau - The 400m Hills of Wales by Myrddyn Phillips and Aled Williams |
Y Trichant - The 300m Hills of Wales by Myrddyn Phillips |
When the original 300m height band of Welsh P30 hills were published on Geoff Crowder’s v-g.me website, this hill was not included in the Hills to be surveyed sub list, as it was considered not to meet the criteria then used for this sub category.
After the sub list was standardised, and interpolated heights and drop values also included the details for this hill were re-assessed and it was listed under the point (Pt. 395m) notation with an estimated c 21m of drop, based on the 395m summit spot height that appears on the Ordnance Survey 1:50,000 Landranger map and an estimated c 374m bwlch height, based on interpolation of 5m contouring between 370m – 375m, with the 395m summit height also given on the interactive mapping hosted on the WalkLakes website.
Extract from the Ordnance Survey 1:50,000 Landranger map |
The Draft Surveyors maps consist of the preliminary drawings made by the Ordnance Survey surveyors between the 1780s and 1840 and formed the basis for the first publicly available One-Inch map. They were drawn at scales of six inches to the mile for areas considered of particular military significance and down to two inches to the mile for other areas. Fair copies were then produced from these preliminary drawings to one inch to the mile and then copper plates were prepared for printing. The Draft Surveyors maps for the whole of Wales are now available online and they form an important part in the study of Welsh upland place-names as they bridge the time frame between the late 18th century and the mid-19th century when the Ordnance Survey produced their first One-Inch maps, and importantly for this hill and its listed name, it is this map that names the hill as Cefn Uchaf.
Extract from the Ordnance Survey Draft Surveyors map |
Extract from the Ordnance Survey One-Inch 'Old Series' map |
The full details for the hill are:
Group: Craig Berwyn
Name: Cefn Uchaf
Previously Listed Name: Pt. 395m
OS 1:50,000 map: 117
Summit Height: 395m (spot height)
Summit Grid Reference: SJ 24921 40228 (spot height)
Bwlch Height: c 374 (interpolation)
Bwlch Grid Reference: SJ 24502 40242 (interpolation)
Drop: c 21m (spot height summit and interpolated bwlch)
Myrddyn Phillips and Aled Williams (April
2022)
No comments:
Post a Comment