Addlebrough (SD 947 878)
There has been a Summit Relocation to a hill that is listed in the The Fours – The 400m Hills of England, with the summit height, col height and their locations, the drop and status of the hill derived from LIDAR analysis conducted by Myrddyn Phillips.
LIDAR image of Addlebrough (SD 947 878) |
The criteria for the list that this summit
relocation applies to are:
The Fours – The 400m Hills of England.
English hills at or above 400m and below 500m in height that have 30m
minimum drop, accompanying the main list are three categories of sub hills; the
400m Sub-Four category, the 390m Sub-Four category and the 390m Double Sub-Four
category. The list is co-authored by
Myrddyn Phillips and Aled Williams and the 2nd edition of the
booklet containing this list was published by Mapping Mountains Publications on
the 24th April 2018.
The Fours - The 400m Hills of England by Myrddyn Phillips and Aled Williams |
The name the hill is listed by is Addlebrough, and
it is adjoined to the Whernside group of hills, which are
situated in the central Pennines, and
it is positioned with the A684 road to its north, a minor road to its west and
the B6160 road to its south-east, and has the village of Bainbridge towards the
north-west.
When the original list that later became known as The Fours – The 400m Hills of England
was first compiled, the summit position of this hill was given as SD 945 881
based on where the contemporary Ordnance Survey 1:25,000 Explorer map indicated
an uppermost 480m ring contour to be situated.
Extract from the Ordnance Survey 1:25,000 Explorer map |
When the 2nd edition of the The Fours – The 400m Hills of England
was published by Mapping Mountains Publications in April 2018, this hill was
listed with an estimated c 94m of drop, based on interpolation of what was
indicated as its highest 480m contour ring that appears on the Ordnance Survey 1:25,000
Explorer map giving an estimated c 481m summit height, with its listed summit
position being relocated to SD 947 878, and the 387m col spot height that
appears on the Ordnance Survey 1:25,000 Explorer map.
However, it was not until LIDAR became available
that the details for this hill could be accurately re-assessed. The LIDAR (Light Detection & Ranging)
technique produced highly accurate height data that is now freely available for
much of England and Wales.
LIDAR summit image of Addlebrough (SD 947 878) |
LIDAR analysis gives the highest ground on this
hill as 478.9m positioned at SD 94744 87872, and in relation to the originally
listed summit position this comes within the parameters of the Summit Relocations used within this page
heading, these parameters are:
The term Summit Relocations applies to when the
high point is positioned in a different field, to a different feature such as a
conifer plantation, within a different map contour, a different point where a
number of potential summit positions are within close proximity, when natural
ground or the natural and intact summit is confirmed compared to a higher point
such as a raised field boundary or covered reservoir that is considered a
relatively recent man-made construct, or a relocation of approximately 100
metres or more in distance from either the position of a map spot height or
from where the summit of the hill was previously thought to exist.
Therefore, the summit
height produced by LIDAR analysis is 478.9m and this is positioned at SD 94744
87872. This position is not given a spot
height on the contemporary Ordnance Survey 1:50,000 Landranger and 1:25,000
Explorer map and is approximately 300 metres south-eastward from where the original
listed summit is positioned.
The full details for the hill are:
Group: Whernside
Name: Addlebrough
OS 1:50,000 map: 98
Summit Height: 478.9m
(LIDAR)
Summit Grid Reference (New Position): SD 94744 87872 (LIDAR)
Col Height: 386.8m
(LIDAR)
Col Grid Reference: SD
94822 87149 (LIDAR)
Drop: 92.1m (LIDAR)
Myrddyn Phillips and Aled Williams (May 2023)
No comments:
Post a Comment