01.12.17
Twyn y Waun (SO 082 070) and Twyn y Waun (SO 085 065)
The man-made and now classified as the Dual Summit of Twyn y Waun (SO 082 070) |
Twyn y Waun now stands
testament to an industrial age where earth has been dug and waste spoil
gathered. The hill is situated to the north-east
of Merthyr Tudful in south Wales and its slopes have long been desecrated by
excavation to the point that its natural summit is now overshadowed by a large
mound of waste spoil that is significantly higher. The bi-product of this waste spoil has also
created a separate hill which is positioned to the south-east. The present height of these two man-made
summits is the result of the Ffos-y-fran Land Reclamation Scheme which consists
of an opencast mine with the waste spoil deposited and latterly forming three
hills, two of which are detailed in this post.
The survey of the Twyn y
Waun hills was instigated by a Facebook post by Rob Woodall who recently visited
them and reported that the listed Pedwar was now overshadowed by its adjacent
man-made hill due to further waste spoil deposit, these hills and other
man-made Pedwarau had long been on the radar for a Trimble survey as Aled had
produced a Word Document in 2015 detailing these and other such hills.
By 8.30am I was
shivering beside my car trying my utmost to get my walking boots on and also at
the same time gloves, ear warmer, balaclava and over-trousers as a fiercely
chilled northern wind blew in across south Wales.
It was only a short walk
from my parking spot to the base of the higher of the two man-made Twyn y Waun
hills; during which I passed over the listed Pedwar. Although decidedly cold a blue sky glimmered
in to life and a pack of horses inquisitively trotted my way as I headed toward
the hill.
Steep and solid grassed
slopes led up to a desolate landscape where black waste spoil pre-dominated
with intermittent glimpses of grasses trying their darnest for a foothold on an
otherwise barren land.
The waste spoiled summit
stretched away flat in nature with occasional undulations, I spent about twenty
minutes assessing the lay of land and gathering two data sets, during which I
looked out from the lipped edge of the summit area to a large black hole still
being worked by heavy machinery, I took a few photos and quickly retraced my
steps to the Trimble which quietly beeped away gathering its data.
Part of the Ffos-y-fran opencast mine |
Once two data sets were
gathered I headed steeply down to the connecting bwlch with the second Twyn y
Waun hill. The bwlch was positioned at
the base of the hill’s northern ridge which was inviting and pleasant in nature
as it was grassed and looked natural.
Twyn y Waun (SO 085 065) |
Gathering data at the bwlch between the two man-made Twyn y Waun hills |
The ridge led up to what
was a relatively easily identified summit, in utter contrast to its
predecessor. I took two data sets from
the summit area and whilst the Trimble beeped away gathering its 300 allotted
data points I peered down to the Ffos-y-fran mine which spanned out across the
land to the south. I had considered
continuing my walk and dropping down to this mine to enquire about locally
known names for these spoil tips, but decided otherwise and reversed my inward
route back to the connecting bwlch and back up to the summit of the first hill
having decided to get a third data set from the area where Rob had noted a ten
figure grid reference for the summit.
Gathering data at one of two points surveyed for the summit position of Twyn y Waun (SO 085 065) |
The Ffos-y-fran mine |
Large pylons march
between these two hills and I was later told that if not for these the two
hills would have been constructed as one.
Crossing the bwlch I found a narrow path which I’d missed on my inward
route, I was soon back on top and the Trimble led me to the area where Rob
noted his preferred summit position. As
the Trimble gathered its final data set for the day I spent time beside two
pools, both iced over, each added much needed variety to this summit and its
harsh blackened exterior.
Descending back toward the bwlch between the two man-made hills |
The summit area of Twyn y Waun (SO 082 070) |
Packing the Trimble away
I retraced my inward route back to the car and drove the short distance to the
mine workings where I was directed to the site office. I hoped that my visit may unearth names that
have become established in the mining community for these two man-made hills. Having chatted with one mine worker and the
security guard at the site office I left with a telephone number and a contact
for further enquiries.
The Dual Summits of Twyn y Waun with the natural summit (SO 084 073) in the foreground and the man-made summit (SO 082 070) in the background |
The two man-made Twyn y Waun hills |
I drove the two hours
home and arrived just in time to unpack my car and walk back up the road to
spend a half hour admiring the intricacies of a beautiful sunset whose colour
sped across the sky.
Sunset |
It had been a good day
on the hill and the afterglow of the sunset stayed with me as I wandered back home
in the chill air of an early winter’s late afternoon.
Survey Result:
Twyn y Waun (reclassified to Dual Summit status)
Summit Height: 476.0m (converted to OSGM15) (significant height revision)
Summit Grid Reference: SO 08209 07041 (Dual Summit confirmed)
Bwlch Height: 380.0m (LIDAR)
Bwlch Grid Reference: SO 08277 08338 (LIDAR)
Drop: 96.0m (Trimble GeoXH 6000 summit and LIDAR bwlch) (prospective Subhump addition)
Bwlch Grid Reference: SO 08277 08338 (LIDAR)
Drop: 96.0m (Trimble GeoXH 6000 summit and LIDAR bwlch) (prospective Subhump addition)
Dominance: 20.16% (Trimble GeoXH 6000 summit and LIDAR bwlch)
Twyn y Waun
Summit Height: 460.5m (converted to OSGM15) (Pedwar addition confirmed on height and drop) (significant height revision)
Summit Grid Reference: SO 08549 06591
Bwlch Height: 419.5m (converted to OSGM15)
Bwlch Grid Reference: SO 08580 06962
Drop: 41.0m (Pedwar addition confirmed on drop and height)
Dominance: 8.89%
For details on the 2nd visit to Twyn y Waun
No comments:
Post a Comment