Mapping Mountains – Hill Reclassifications – 30-99m Twmpau

Cae Canol (SH 498 709) – 30-99m Sub-Twmpau addition

There has been confirmation of an addition to the list of 30-99m Twmpau, with the summit height, bwlch height and their locations, the drop and status of the hill derived from LIDAR analysis conducted by Myrddyn Phillips. 

LIDAR image of Cae Canol (SH 498 709)

The criteria for the list that this addition applies to are: 

30-99m Twmpau – Welsh hills at or above 30m and below 100m in height that have 30m minimum drop, with an accompanying sub list entitled the 30-99m Sub-Twmpau with the criteria for this sub category being all Welsh hills at or above 30m and below 100m in height with 20m or more and below 30m of drop, with the word Twmpau being an acronym standing for thirty welsh metre prominences and upward. 

The 30-99m Twmpau by Myrddyn Phillips

The name the hill is listed by is Cae Canol and this was derived from the Tithe map, and it is adjoined to the Ynys Môn group of hills, which are situated in the north-western part of North Wales (Region A, Sub-Region A1), and it is positioned with a minor road next to its summit and the A5 and A55 roads to its north, and has the village of Llanddaniel-fab towards the south-west. 

When the original 30-99m height band of Welsh P30 hills were published on Geoff Crowder’s v-g.me website this hill was not included in the Hills to be surveyed sub list, as it was considered not to meet the criteria then used for this sub category. 

After the sub list was standardised, and interpolated heights and drop values also included the details for this hill were re-evaluated and it was listed with an estimated c 25m of drop based on the 66m summit spot height and an estimated c 41m bwlch height based on interpolation of 5m contouring between 40m – 45m that appear on the Ordnance Survey 1:25,000 Explorer map. 

Extract from the Ordnance Survey 1:25,000 Explorer map

However, it was not until LIDAR became available that the details for this hill could be accurately re-assessed.  The LIDAR (Light Detection & Ranging) technique produced highly accurate height data that is now freely available for much of England and Wales. 

Therefore, the confirmation of the addition of this hill to 30-99m Sub-Twmpau status is due to LIDAR analysis, resulting in a 65.5m summit height and a 40.45m bwlch height, with these values giving this hill 25.1m of drop, which is sufficient for it to be classified as a 30-99m Sub-Twmpau. 

 

The full details for the hill are: 

Group:  Ynys Môn 

Name:  Cae Canol 

OS 1:50,000 map:  114, 115

Summit Height:  65.5m (LIDAR) 

Summit Grid Reference:  SH 49886 70969 (LIDAR) 

Bwlch Height:  40.45m (LIDAR) 

Bwlch Grid Reference:  SH 50115 71771 (LIDAR) 

Drop:  25.1m (LIDAR) 

 

Myrddyn Phillips (May 2021)