Safle Claddu Nant y Caws (SN 468 174) & (SN 469
174) and Cae Mawr (SN 462 175)
There has been a Significant Height Revision to a
hill that is now listed as a Dual Summit in the 100m Twmpau and Y Trechol –
The Dominant Hills of Wales, with the summit height, bwlch height and their
locations, the drop, dominance and status of the hill derived from LIDAR
analysis conducted by Myrddyn Phillips.
|
LIDAR image of Cae Mawr (SN 462 175) and Safle Claddu Nant y Caws (SN 468 174) and (SN 469 174) |
The criteria for the two listings that this height revision
applies to are:
100m Twmpau
– Welsh hills at or above
100m and below 200m in height that have 30m minimum drop, with an accompanying sub list entitled the 100m
Sub-Twmpau, with the criteria for this sub category being all Welsh hills at or
above 100m and below 200m in height with 20m or more and below 30m of drop,
with the word Twmpau being an acronym standing for thirty welsh metre prominences and upward.
|
100m Twmpau by Myrddyn Phillips |
|
Y Trechol - The Dominant Hills of Wales by Myrddyn Phillips |
A
hill classified as a Dual Summit is defined as one which has an extant natural
summit coupled with that of a higher artificial summit, with the latter that
can be described as stable in character.
In the main, these recent man-made constructions are the result of
quarrying activities producing spoil tips, or as in this instance a landfill. These recent man-made constructions are
treated differently to ancient man-made constructions such as hill forts and
tumuli, as if the latter are deemed stable and of an earthen character their
age dictates that they can be viewed as being permanent in nature and are now
effectively a part of the hill. For
those bagging Dual Summit hills, a visit to either the natural high point or
the elevated man-made high point is sufficient to claim an ascent of the hill. With the Dual Summit classification being a
relatively new category and fist instigated in January 2018 for a Dual Summit
Pedwar.
The name the hill is now listed by is Safle Claddu Nant y Caws for the higher man-made summit and Cae Mawr for the lower natural
summit, and it is adjoined
to the Mynydd Sylen group of hills, which are situated in the southern part of South Wales (Region B,
Sub-Region B5), and the two summits are
positioned with the A48 road to their north and a minor road to their
south-west, and has the town of Caerfyrddin (Carmarthen) towards the
north-west.
|
Extract from the Ordnance Survey 1:25,000 Explorer map |
After the sub list was standardised, and
interpolated heights and drop values also included the details for this hill
were re-evaluated and it was then separated in to its two component parts, with
the man-made summit listed with an estimated c 59m of drop, based on an
estimated c 156m summit height positioned at SN 46909 17343 and an estimated c
97m bwlch height, with both heights based on interpolation of 5m contouring
that appeared on the interactive mapping hosted on the OS Maps website. With the lower natural summit listed with a
155 summit height and the bwlch between these two summits estimated as c 138m,
which if separating these hills would give an estimated c 17m of drop.
However, it was not until LIDAR became available
that the details for these summits could be accurately re-assessed. The LIDAR (Light Detection & Ranging)
technique produced highly accurate height data that is now freely available for
much of England and Wales.
|
LIDAR summit image of Safle Claddu Nant y Caws (SN 468 174) and (SN 469 174) |
LIDAR analysis gives the highest ground at the
man-made summit as 163.8m positioned at SN 46899 17416 & SN 46900 17411, and this
compared to its previously listed summit height comes within
the parameters of the Significant Height Revisions used within this page
heading, these parameters are:
The term Significant Height Revisions applies to
any listed hill whose interpolated height and Ordnance Survey or Harvey map
summit spot height has a 2m or more discrepancy when compared to the survey
result produced by the Trimble GeoXH 6000 or analysis of data produced via
LIDAR, also included are hills whose summit map data is missing an uppermost
ring contour when compared to the data produced by the Trimble or by LIDAR
analysis.
Therefore, the new listed summit height of this
hill is 163.8m and this was derived from LIDAR analysis, this is 7.8m higher
than the previous listed summit height of c 156m, which was based on
interpolation of its uppermost 155m ring contour that appeared on the
interactive mapping hosted on the OS Maps website.
ills of Wales, and are reproduced below@
The full details for the hill are:
Group: Mynydd Sylen
Name: Safle Claddu Nant y Caws (artificial Dual Summit) and Cae Mawr (natural Dual Summit)
OS 1:50,000 map: 159
Summit Height (New Height):
163.8m (artificial Dual Summit) and 155.1m (natural Dual Summit) (LIDAR)
Summit Grid Reference:
SN
46899 17416 & SN 46900 17411 (artificial Dual Summit) and SN 46268 17566
(natural Dual Summit) (LIDAR)
Bwlch Height: 98.5m
(LIDAR)
Bwlch Grid Reference:
SN 39491 11374 & SN 39493 11375 (LIDAR)
Drop: 65.3m (artificial
Dual Summit) and 56.6m (natural Dual Summit) (LIDAR)
Dominance: 39.89%
(artificial Dual Summit) and 36.50% (natural Dual Summit) (LIDAR)
Myrddyn Phillips (July 2024)
No comments:
Post a Comment