Mapping Mountains – Significant Height Revisions – Y Trichant – The 300m Hills of Wales and Y Trechol – The Dominant Hills of Wales

 

Cefn y Coed (SO 211 934) 

There has been a Significant Height Revision to a hill that is listed in the Y Trichant – The 300m Hills of Wales and the Y Trechol – The Dominant Hills of Wales, with the summit height, bwlch height and their locations, the drop, the dominance and status of the hill derived from a Leica RX1250 survey conducted by Alan Dawson and a subsequent Trimble GeoXH 6000 summit survey and LIDAR bwlch analysis conducted by Myrddyn Phillips. 

Cefn y Coed (SO 211 934)

The criteria for the two listings that this height revision applies to are:

Y Trichant – The 300m Hills of Wales – Welsh hills at or above 300m and below 400m in height that have 30m minimum drop, with an accompanying sub list entitled the Sub-Trichant, with the criteria for this sub category being all Welsh hills at or above 300m and below 400m in height with 20m or more and below 30m of drop.  The list is authored by Myrddyn Phillips with the Introduction to the list and the renaming of it appearing on Mapping Mountains on the 13^th May 2017, and the Introduction to the Mapping Mountains publication of the list appearing on the 1^st January 2022. 

Y Trichant - The 300m Hills of Wales by Myrddyn Phillips

Y Trechol – The Dominant Hills of Wales – Welsh P30 hills whose prominence equal or exceed half that of their absolute height.  With the criteria for Lesser Dominant status being those additional Welsh P30 hills whose prominence is between one third and half that of their absolute height.  The list is authored by Myrddyn Phillips with the Introduction to the start of the Mapping Mountains publication of this list appearing on the 3^rd December 2015, and the list is now available in its entirety on Mapping Mountains in Google Doc format. 

Y Trechol - The Dominant Hills of Wales by Myrddyn Phillips

The name the hill is listed by is Cefn y Coed and this was derived from the Tithe map, the Ordnance Survey One-Inch ‘Old Series’ map and local enquiry, and it is adjoined to the Cilfaesty group of hills, which are situated in the north-eastern part of South Wales (Region B, Sub-Region B2), and it is positioned with a minor road to its north and the A489 road to its south, and has the town of Trefaldwyn (Montgomery) to its north north-east.

When the original 300m height band of Welsh P30 hills were published on Geoff Crowder’s v-g.me website, this hill was listed with a non interpolated summit height of c 355m, based on the uppermost ring contour that appears on the Ordnance Survey 1:25,000 Explorer map. 

Extract from the Ordnance Survey 1:25,000 Explorer map

After the sub list was standardised, and interpolated heights and drop values also included the details for this hill were re-evaluated and it was listed with an estimated c 173m drop, based on an estimated c 356m summit height and an estimated c 183m bwlch height, with both heights based on interpolation of 5m contouring that appears on the Ordnance Survey 1:25,000 Explorer map. 

The Leica RX1250 set-up position at the summit of Cefn y Coed

However, it was not until the survey with the Leica RX1250 and subsequent LIDAR analysis and the survey with the Trimble GeoXH 6000 that the details for this hill could be accurately re-assessed. 

The Trimble GeoXH 6000 gathering data at the summit of Cefn y Coed

The summit height produced by the Leica RX1250 survey is 353.5m positioned at SO 21163 93413 and the summit height produced by the Trimble GeoXH 6000 survey is 353.6m positioned at SO 21164 93411, and this comes within the parameters of the Significant Height Revisions used within this page heading, these parameters are:

The term Significant Height Revisions applies to any listed hill whose interpolated height and Ordnance Survey, Harvey or other interactive map summit spot height has a 2m or more discrepancy when compared to the survey result produced by the Trimble GeoXH 6000 or analysis of data produced via LIDAR.  Also included are hills whose summit map data is missing an uppermost ring contour when compared with the data produced by the Trimble or by LIDAR analysis.

Therefore, the new listed summit height of this hill is 353.6m and this was derived from a Trimble GeoXH 6000 survey, this is 2.4m lower than the previously listed summit height of c 356m, which was based on interpolation of the uppermost ring contour that appears on the contemporary Ordnance Survey 1:25,000 Explorer map.

 

ills of Wales, and are reproduced below@

The full details for the hill are:

Group:  Cilfaesty

Name:  Cefn y Coed

OS 1:50,000 map:  137

Summit Height (New Height):  353.6m (converted to OSGM15, Trimble GeoXH 6000)

Summit Grid Reference:  SO 21164 93411 (Trimble GeoXH 6000)  

Bwlch Height:  184.2m (LIDAR)

Bwlch Grid Reference:  SO 20667 90868 (LIDAR)

Drop:  169.3m (Trimble GeoXH 6000 summit and LIDAR bwlch)

Dominance:  47.89% (Trimble GeoXH 6000 summit and LIDAR bwlch)

 

Myrddyn Phillips (May 2026)

Mapping Mountains – Significant Height Revisions – 500m Twmpau, Y Trechol – The Dominant Hills of Wales and The Welsh Highlands – Uchafion Cymru

 

Yr Eifl (SH 364 447) 

There has been a Significant Height Revision that is retrospective to a hill that is listed in the 500m Twmpau, Y Trechol – The Dominant Hills of Wales and the The Welsh Highlands – Uchafion Cymru, with the summit height, bwlch height and their locations, the drop, the dominance and status of the hill derived from a Leica GS15 summit survey conducted by John Barnard, Graham Jackson and Myrddyn Phillips, and LIDAR bwlch analysis conducted by Aled Williams. 

Yr Eifl (SH 364 447)

The criteria for the three listings that this height revision applies to are:

500m Twmpau – Welsh hills at or above 500m and below 600m in height that have 30m minimum drop, with an accompanying sub category entitled the 500m Sub-Twmpau consisting of all Welsh hills at or above 500m and below 600m in height that have 20m or more and below 30m of drop.  With the word Twmpau being an acronym standing for thirty welsh metre prominences and upward.  The list is authored by Myrddyn Phillips and is published on Mapping Mountains in Google Doc format.

500m Twmpau by Myrddyn Phillips

Y Trechol – The Dominant Hills of Wales – Welsh P30 hills whose prominence equal or exceed half that of their absolute height.  With the criteria for Lesser Dominant status being those additional Welsh P30 hills whose prominence is between one third and half that of their absolute height.  The list is authored by Myrddyn Phillips with the Introduction to the start of the Mapping Mountains publication of this list appearing on the 3^rd December 2015, and the list is now available in its entirety on Mapping Mountains in Google Doc format. 

Y Trechol - The Dominant Hills of Wales by Myrddyn Phillips

The Welsh Highlands – Uchafion Cymru – Welsh hills at or above 500m in height with 15m minimum drop, with an accompanying sub list entitled the Welsh Highland Subs, the criteria for which is all Welsh hills at or above 500m in height with 10m or more and below 15m of drop.  This list is authored by Myrddyn Phillips and Aled Williams with the Introduction to the list published on Mapping Mountains in November 2015 and the latest update relating to the list published on Mapping Mountains in January 2023.

The Welsh Highlands - Uchafion Cymru by Aled Williams and Myrddyn Phillips

The name the hill is listed by is Yr Eifl and it is adjoined to its own group of hills, which are situated in the north-western part of North Wales (Region A, Sub-Region A1), and it is positioned with minor roads to its north-east, the B4417 road to its south and the A499 road to its east, and has the villages of Trefor towards the north north-east and Llithfaen towards the south south-west.

When the listings of the 500m Twmpau, Y Trechol – The Dominant Hills of Wales and The Welsh Highlands – Uchafion Cymru were first compiled, this hill was listed with a summit height of 564m, based on the spot height adjoined to a triangulation pillar that appears on the Ordnance Survey 1:50,000 Landranger and 1:25,000 Explorer map. 

Extract from the Ordnance Survey 1:25,000 Explorer map

However, it was not until the survey with the Leica GS15 that the details for this hill could be accurately re-assessed.  Although the trig pillar is positioned on a relatively stable base it is positioned on the top of a substantial ancient cairn which consists of a multitude of individual stones and rocks and as this is considered as not being permanent in nature, it is the highest remaining natural ground on the periphery of the ancient cairn that is taken as both its listed summit height and summit position, and when compared to its originally listed summit height of 564m this comes within the parameters of the Significant Height Revisions used within this page heading, these parameters are:

The term Significant Height Revisions applies to any listed hill whose interpolated height and Ordnance Survey, Harvey or other interactive map summit spot height has a 2m or more discrepancy when compared to the survey result produced by the Trimble GeoXH 6000 or other GNSS equipment or analysis of data produced via LIDAR.  Also included are hills whose summit map data is missing an uppermost ring contour when compared with the data produced by the Trimble or by LIDAR analysis. 

Gathering data with the Leica GS15 at the listed summit position of Yr Eifl

Therefore, the new listed summit height of this hill is 560.7m and this was derived from a Leica GS15 survey, this is 3.3m lower than the originally listed summit height of 564m, which was based on the spot height adjoined to a triangulation pillar that appears on the contemporary Ordnance Survey 1:50,000 Landranger and 1:25,000 Explorer map.

 

ills of Wales, and are reproduced below@

The full details for the hill are:

Group:  Yr Eifl

Name:  Yr Eifl

OS 1:50,000 map:  123

Summit Height (New Height):  560.7m (converted to OSGM15, Leica GS15)

Summit Grid Reference:  SH 36482 44734 (Leica GS15)  

Bwlch Height:  129.4m (LIDAR)

Bwlch Grid Reference:  SH 45347 48678 (LIDAR)

Drop:  431.3m (Leica GS15 summit and LIDAR bwlch)

Dominance:  76.92% (Leica GS15 summit and LIDAR bwlch)

 

Myrddyn Phillips and Aled Williams (February 2026)

Mapping Mountains – Significant Height Revisions – 30-99m Twmpau, Y Trechol – The Dominant Hills of Wales and Y Pellennig – The Remotest Hills of Wales

North Bishop (SM 670 280) 

There has been a Significant Height Revision to a hill that is listed in the 30-99m Twmpau, Y Trechol – The Dominant Hills of Wales and Y Pellennig – The Remotest Hills of Wales, with the summit height and its location, the drop, dominance and status of the hill derived from LIDAR analysis conducted by Myrddyn Phillips.                       

North Bishop (SM 670 280)

The criteria for the three listings that this height revision applies to are:

30-99m Twmpau - Welsh hills at or above 30m and below 100m in height that have 30m minimum drop, with an accompanying sub list entitled the 30-99m Sub-Twmpau, with the criteria for this sub category being all Welsh hills at or above 30m and below 100m in height with 20m or more and below 30m of drop.  The list is authored by Myrddyn Phillips, with the word Twmpau being an acronym standing for thirty welsh metre prominences and upward. 

30-99m Twmpau by Myrddyn Phillips

Y Trechol – The Dominant Hills of Wales – Welsh P30 hills whose prominence equal or exceed half that of their absolute height.  With the criteria for Lesser Dominant status being those additional Welsh P30 hills whose prominence is between one third and half that of their absolute height.  The list is authored by Myrddyn Phillips with the Introduction to the start of the Mapping Mountains publication of this list appearing on the 3^rd December 2015, and the list is now available in its entirety on Mapping Mountains in Google Doc format. 

Y Trechol - The Dominant Hills of Wales by Myrddyn Phillips

Y Pellennig – The Remotest Hills of Wales - Welsh hills whose summit is at least 2.5km from the nearest paved public road and the hill has 15m minimum drop.  The list is co-authored by Myrddyn Phillips and Aled Williams and is available as a downloadable e-booklet and print-booklet version on Mapping Mountains Publications with the up-to-date master list available to download on the Mapping Mountains site in Google Doc format.

Y Pellennig - The Remotest Hills of Wales by Myrddyn Phillips and Aled Williams

The name the hill is listed by is North Bishop, and it is adjoined to the Garn Fawr group of hills, which are situated in the south-western part of South Wales (Region B, Sub-Region B1), and it forms part of an islet chain positioned to the west of mainland Wales with a minor road on the mainland to its east south-east, and has the city of Tyddewi (St David’s) on the mainland also towards the east south-east.

When the original 30-99m height band of Welsh P30 hills compiled by Myrddyn Phillips were published on Geoff Crowder’s v-g.me website, this hill was listed with a 44m summit height, based on the spot height that appears on the Ordnance Survey 1:25,000 Explorer map.  And it was this height that was given the hill when the listings of the Y Trechol – The Dominant Hills of Wales and Y Pellennig – The Remotest Hills of Wales were subsequently published. 

Extract from the Ordnance Survey 1:25,000 Explorer map

However, it was not until LIDAR became available that the details for this hill could be accurately re-assessed.  The LIDAR (Light Detection & Ranging) technique produced highly accurate height data that is now freely available for much of England and Wales. 

LIDAR image of North Bishop (SM 670 280)

The summit height produced by LIDAR analysis is 40.0m and when compared to the previously listed summit height, this comes within the parameters of the Significant Height Revisions used within this page heading, and these parameters are:

The term Significant Height Revisions applies to any listed hill whose interpolated height and Ordnance Survey, Harvey or other interactive map summit spot height has a 2m or more discrepancy when compared to the survey result produced by the Trimble GeoXH 6000 or analysis of data produced via LIDAR.  Also included are hills whose summit map data is missing an uppermost ring contour when compared with the data produced by the Trimble or by LIDAR analysis.

Therefore, the new listed summit height of this hill is 40.0m and this was derived from LIDAR analysis.  This is 4.0m lower than the previous listed summit height of 44m, which was based on the spot height that appears on the Ordnance Survey 1:25,000 Explorer map. 

 

The full details for the hill are:

Group:  Garn Fawr 

Name:  North Bishop 

OS 1:50,000 map:  157

Summit Height (New Height):  40.0m (LIDAR) 

Summit Grid Reference:  SM 67087 28056 (LIDAR)               

Bwlch Height:  N/A (sea level) 

Bwlch Grid Reference:  N/A (sea level) 

Drop:  40.0m (LIDAR) 

Dominance:  100.00% (LIDAR) 

Remoteness:  6.000km 

 

Myrddyn Phillips and Aled Williams (November 2025)

  

Mapping Mountains – Significant Height Revisions – 30-99m Twmpau and Y Trechol – The Dominant Hills of Wales

 

Penllwyngwyn Mawr (SN 549 007) 

There has been a Significant Height Revision to a hill that is listed in the 30-99m Twmpau and Y Trechol – The Dominant Hills of Wales, with the summit height, bwlch height and their locations, the drop, dominance and status of the hill derived from LIDAR analysis conducted by Myrddyn Phillips.               

LIDAR image of Penllwyngwyn Mawr (SN 549 007)

The criteria for the two listings that this height revision applies to are:

30-99m Twmpau – Welsh hills at or above 30m and below 100m in height that have 30m minimum drop, with an accompanying sub list entitled the 30-99m Sub-Twmpau, with the criteria for this sub category being all Welsh hills at or above 30m and below 100m in height with 20m or more and below 30m of drop, with the word Twmpau being an acronym standing for thirty welsh metre prominences and upward. 

30-99m Twmpau by Myrddyn Phillips

Y Trechol – The Dominant Hills of Wales – Welsh P30 hills whose prominence equal or exceed half that of their absolute height.  With the criteria for Lesser Dominant status being those additional Welsh P30 hills whose prominence is between one third and half that of their absolute height.  The list is authored by Myrddyn Phillips with the Introduction to the start of the Mapping Mountains publication of this list appearing on the 3^rd December 2015, and the list is now available in its entirety on Mapping Mountains in Google Doc format. 

Y Trechol - The Dominant Hills of Wales by Myrddyn Phillips

The name the hill is now listed by is Penllwyngwyn Mawr and this was derived from the Tithe map, and it is adjoined to the Mynydd Sylen group of hills, which are situated in the southern part of South Wales (Region B, Sub-Region B5), and it is positioned with the B4297 road to its immediate north and to its south, and has the town of Llanelli towards the west.

When the original 30-99m height band of Welsh P30 hills were published on Geoff Crowder’s v-g.me website, this hill was included in the main P30 list with a 72m summit height, based on the spot height positioned at SN 55146 00863 that appears on the contemporary Ordnance Survey 1:25,000 Explorer map. 

Extract from the Ordnance Survey 1:25,000 Explorer map

When the sub list was standardised, and interpolated heights and drop values also included the details for this hill were re-evaluated and it was listed with an estimated c 47m of drop, based on an estimated c 75m summit height positioned at SH 54904 00700 and an estimated c 28m bwlch height, based on interpolation of 5m contouring between 25m – 30m.  With the caveat that the uppermost 75m ring contour had been missed when the details for this hill were first compiled and published.

However, it was not until LIDAR became available that the details for this hill could be accurately re-assessed.  The LIDAR (Light Detection & Ranging) technique produced highly accurate height data that is now freely available for much of England and Wales. 

LIDAR summit image of Penllwyngwyn Mawr (SN 549 007)

The summit height produced by LIDAR analysis is 76.8m and is positioned at SN 54907 00706, and this comes within the parameters of the Significant Height Revisions used within this page heading, these parameters are:

The term Significant Height Revisions applies to any listed hill whose interpolated height and Ordnance Survey or Harvey map summit spot height has a 2m or more discrepancy when compared to the survey result produced by the Trimble GeoXH 6000 or analysis of data produced via LIDAR, also included are hills whose summit map data is missing an uppermost ring contour when compared to the data produced by the Trimble or by LIDAR analysis.

Therefore, the new listed summit height of this hill is 76.8m and this was derived from LIDAR analysis, this is 4.8m higher than the originally listed summit height of 72m, which was based on the spot height that appears on the contemporary Ordnance Survey 1:25,000 Explorer map.

 

ills of Wales, and are reproduced below@

The full details for the hill are:

Group:  Mynydd Sylen 

Name:  Penllwyngwyn Mawr 

OS 1:50,000 map:  164, 178

Summit Height (New Height):  76.8m (LIDAR) 

Summit Grid Reference:  SN 54907 00706 (LIDAR)               

Bwlch Height:  25.0m (LIDAR) 

Bwlch Grid Reference:  SN 53996 01771 (LIDAR) 

Drop:  51.8m (LIDAR) 

Dominance:  67.44% (LIDAR)

 

Myrddyn Phillips (October 2024)