Mapping Mountains – Significant Name Changes – 30-99m Twmpau and Y Trechol – The Dominant Hills of Wales

Ynys Fach (SN 668 951) 

There has been a Significant Name Change to a hill that is listed in the 30-99m Twmpau and Y Trechol – The Dominant Hills of Wales, with the summit height, bwlch height and their locations, the drop, dominance and status of the hill derived by Joe Nuttall who produced a summit analysis programme using LIDAR, and then by LIDAR analysis initially conducted by Jim Bloomer and subsequently by Myrddyn Phillips. 

LIDAR image of Ynys Fach (SN 668 951)

The criteria for the two listings that this name change applies to are: 

30-99m Twmpau - Welsh hills at or above 30m and below 100m in height with 30m minimum drop, with an accompanying sub list entitled the 30-99m Sub-Twmpau with the criteria for this sub category being all Welsh hills at or above 30m and below 100m in height with 20m or more and below 30m of drop, with the word Twmpau being an acronym standing for thirty welsh metre prominences and upward. 

The 30-99m Twmpau by Myrddyn Phillips

Y Trechol – The Dominant Hills of Wales – Welsh P30 hills whose prominence equal or exceed half that of their absolute height.  With the criteria for Lesser Dominant status being those additional Welsh P30 hills whose prominence is between one third and half that of their absolute height.  The list is authored by Myrddyn Phillips with the Introduction to the start of the Mapping Mountains publication of this list appearing on the 3^rd December 2015, and which is now available in its entirety on Mapping Mountains in Google Doc format. 

Y Trechol - The Dominant Hills of Wales by Myrddyn Phillips

The hill is adjoined to the Pumlumon group of hills which are situated in the north-western part of Mid and West Wales (Region B, Sub-Region B2), and it has the A487 road to its south-east and the town of Machynlleth towards the north-east. 

The hill appeared in the original 30-99m Welsh P30 list on Geoff Crowder’s v-g.me website under the transposed name of Ynys Greigiog, which is a prominent name that appears adjacent to this hill on contemporary Ordnance Survey 1:50,000 Landranger and 1:25,000 Explorer maps.

Ynys Greigiog

30c

SN670948

135

23

 

During my early hill listing I paid little regard to name placement on the map, or the meaning of names and to what feature the name was appropriately applied to.  Therefore, I prioritised names for listing purposes that I now understand are either inappropriate or where another name is viewed as being more appropriate. 

Extract from the Ordnance Survey 1:25,000 Explorer map

Since publication of these P30 lists on Geoff Crowder’s v-g.me website there have been a number of Ordnance Survey maps made available online, some of these are historic such as the series of Six-Inch maps on the National Library of Scotland website, whilst others are current and digitally updated such as the Vector Map Local hosted on the Geograph website and which was entitled the Interactive Coverage Map, and the interactive mapping on the Magic Maps and WalkLakes websites, and it is the Ordnance Survey series of Six-Inch maps that give the name of Ynys Fach. 

Extract from the Ordnance Survey series of Six-Inch maps

Therefore, the name this hill is now listed by in the 30-99m Twmpau and Y Trechol – The Dominant Hills of Wales is Ynys Fach and this was derived from the Ordnance Survey series of Six-Inch maps. 

 

The full details for the hill are: 

Group:  Pumlumon 

Name:  Ynys Fach

Previously Listed Name:  Ynys Greigiog 

OS 1:50,000 map:  135

Summit Height:  43.5m (LIDAR) 

Summit Grid Reference:  SN 66845 95141 (LIDAR) 

Bwlch Height:  2.1m (LIDAR) 

Bwlch Grid Reference:  SN 67483 95096 (LIDAR) 

Drop:  41.3m (LIDAR) 

Dominance:  95.10% (LIDAR)

 

Myrddyn Phillips (April 2021)

 

 

 

 

  

Mapping Mountains – Summit Relocations – 30-99m Twmpau and Y Trechol – The Dominant Hills of Wales

 

Ynys Fach (SN 668 951) 

There has been a Summit Relocation to a hill that is listed in the 30-99m Twmpau and Y Trechol – The Dominant Hills of Wales, with the summit height, bwlch height and their locations, the drop, dominance and status of the hill derived by Joe Nuttall who produced a summit analysis programme using LIDAR, and then by LIDAR analysis initially conducted by Jim Bloomer and subsequently by Myrddyn Phillips. 

LIDAR image of Ynys Fach (SN 668 951)

The criteria for the two listings that this summit relocation applies to are:

30-99m Twmpau - Welsh hills at or above 30m and below 100m in height with 30m minimum drop, with an accompanying sub list entitled the 30-99m Sub-Twmpau with the criteria for this sub category being all Welsh hills at or above 30m and below 100m in height with 20m or more and below 30m of drop, with the word Twmpau being an acronym standing for thirty welsh metre prominences and upward. 

The 30-99m Twmpau by Myrddyn Phillips

Y Trechol - The Dominant Hills of Wales - Welsh P30 hills whose prominence  equal or exceed half that of their absolute height.  With the criteria for Lesser Dominant status being those additional Welsh P30 hills whose prominence is between one third and half that of their absolute height, with the Introduction to the Mapping Mountains publication of this list appearing on the 3^rd December 2015, and the list is now available in its entirety on Mapping Mountains in Google Doc format. 

Y Trechol - The Dominant Hills of Wales by Myrddyn Phillips

The name the hill is now listed by is Ynys Fach, and it is adjoined to the Pumlumon group of hills which are situated in the north-western part of Mid and West Wales (Region B, Sub-Region B2), and it has the A487 road to its south-east and the town of Machynlleth towards the north-east. 

When the original 30-99m height band of Welsh P30 hills were published on Geoff Crowder’s v-g.me website this hill was included in the Hills to be surveyed sub list that accompanied the main P30 list, as it was considered not to meet the criteria then used in the main P30 category. 

After the sub list was standardised, and interpolated heights and drop values also included the details for this hill were re-evaluated and it was listed with an estimated c 27m of drop based on an estimated c 34m summit height positioned at SN 670 948 and an estimated c 7m bwlch height, with both values based on interpolation of 10m contouring that appears on the Ordnance Survey 1:25,000 Explorer map, with 30m being the uppermost contour given the hill on this map. 

Extract from the Ordnance Survey 1:25,000 Explorer map

However, it was not until LIDAR became available that the details for this hill could be accurately re-assessed.  The LIDAR (Light Detection & Ranging) technique produced highly accurate height data that is now freely available for much of England and Wales. 

The summit height produced by LIDAR analysis is 43.5m and is positioned at SN 66845 95141, and this comes within the parameters of the Summit Relocations used within this page heading, these parameters are: 

The term Summit Relocations applies when the hill’s high point is found to be positioned; in a different field, to a different feature such as in a conifer plantation, placed within a different map contour, to a different point where a number of potential summit positions are within close proximity, or when natural ground or the natural and intact summit of a hill is confirmed compared to a higher point such as a raised field boundary that is judged to be a relatively recent man-made construct, or a relocation of approximately 100 metres or more in distance from either the position of a map spot height or from where the summit of the hill was previously thought to exist. 

Therefore, the summit height produced by LIDAR analysis is 43.5m and this is positioned at SN 66845 95141, this position is not given a spot height on contemporary Ordnance Survey 1:50,000 Landranger and 1:25,000 Explorer maps, and is approximately 300 metres north north-westward from where the previously listed summit is positioned.

 

The full details for the hill are: 

Group:  Pumlumon 

Name:  Ynys Fach 

OS 1:50,000 map:  135

Summit Height:  43.5m (LIDAR) 

Summit Grid Reference (New Position):  SN 66845 95141 (LIDAR) 

Bwlch Height:  2.1m (LIDAR) 

Bwlch Grid Reference:  SN 67483 95096 (LIDAR) 

Drop:  41.3m (LIDAR) 

Dominance:  95.10% (LIDAR) 

 

Myrddyn Phillips (April 2021)

 

 

 

Mapping Mountains – Significant Height Revisions – 30-99m Twmpau and Y Trechol – The Dominant Hills of Wales

 

Ynys Fach (SN 668 951) 

There has been a Significant Height Revision to a hill that is listed in the 30-99m Twmpau and Y Trechol – The Dominant Hills of Wales, with the summit height, bwlch height and their locations, the drop, dominance and status of the hill derived by Joe Nuttall who produced a summit analysis programme using LIDAR, and then by LIDAR analysis initially conducted by Jim Bloomer and subsequently by Myrddyn Phillips. 

LIDAR image of Ynys Fach (SN 668 951)

The criteria for the two listings that this height revision applies to are:

30-99m Twmpau - Welsh hills at or above 30m and below 100m in height with 30m minimum drop, with an accompanying sub list entitled the 30-99m Sub-Twmpau with the criteria for this sub category being all Welsh hills at or above 30m and below 100m in height with 20m or more and below 30m of drop, with the word Twmpau being an acronym standing for thirty welsh metre prominences and upward. 

The 30-99m Twmpau by Myrddyn Phillips

Y Trechol - The Dominant Hills of Wales - Welsh P30 hills whose prominence  equal or exceed half that of their absolute height.  With the criteria for Lesser Dominant status being those additional Welsh P30 hills whose prominence is between one third and half that of their absolute height, with the Introduction to the Mapping Mountains publication of this list appearing on the 3^rd December 2015, and the list is now available in its entirety on Mapping Mountains in Google Doc format. 

Y Trechol - The Dominant Hills of Wales by Myrddyn Phillips

The name the hill is now listed by is Ynys Fach, and it is adjoined to the Pumlumon group of hills which are situated in the north-western part of Mid and West Wales (Region B, Sub-Region B2), and it has the A487 road to its south-east and the town of Machynlleth towards the north-east. 

When the original 30-99m height band of Welsh P30 hills were published on Geoff Crowder’s v-g.me website this hill was included in the Hills to be surveyed sub list that accompanied the main P30 list, as it was considered not to meet the criteria then used in the main P30 category. 

After the sub list was standardised, and interpolated heights and drop values also included the details for this hill were re-evaluated and it was listed with an estimated c 27m of drop based on an estimated c 34m summit height and an estimated c 7m bwlch height, with both values based on interpolation of 10m contouring that appears on the Ordnance Survey 1:25,000 Explorer map, with 30m being the uppermost contour given the hill on this map. 

Extract from the Ordnance Survey 1:25,000 Explorer map

However, it was not until LIDAR became available that the details for this hill could be accurately re-assessed.  The LIDAR (Light Detection & Ranging) technique produced highly accurate height data that is now freely available for much of England and Wales. 

LIDAR summit image of Ynys Fach

The summit height produced by LIDAR analysis is 43.5m and this comes within the parameters of the Significant Height Revisions used within this page heading, these parameters are: 

The term Significant Height Revisions applies to any listed hill whose interpolated height and Ordnance Survey or Harvey map summit spot height has a 2m or more discrepancy when compared to the survey result produced by the Trimble GeoXH 6000 or analysis of data produced via LIDAR, also included are hills whose summit map data is missing an uppermost ring contour when compared to the data produced by the Trimble or by LIDAR analysis. 

Therefore, this hill’s new listed summit height is 43.5m and this was derived from LIDAR analysis, this is 9.5m higher than the previous listed summit height of c 34m which was derived from interpolation of the uppermost contour given the hill on contemporary Ordnance Survey 1:25,000 Explorer maps.

 

ills of Wales, and are reproduced below@

The full details for the hill are:

Group:  Pumlumon 

Name:  Ynys Fach 

OS 1:50,000 map:  135

Summit Height (New Height):  43.5m (LIDAR) 

Summit Grid Reference:  SN 66845 95141 (LIDAR) 

Bwlch Height:  2.1m (LIDAR) 

Bwlch Grid Reference:  SN 67483 95096 (LIDAR) 

Drop:  41.3m (LIDAR) 

Dominance:  95.10% (LIDAR)

 

Myrddyn Phillips (April 2021)

 

 

Mapping Mountains – Hill Reclassifications – Y Trechol – The Dominant Hills of Wales

 

Ynys Fach (SN 668 951) – Dominant addition

There has been an addition to the list of the Y Trechol – The Dominant Hills of Wales, with the summit height, bwlch height and their locations, the drop and status of the hill derived by Joe Nuttall who produced a summit analysis programme using LIDAR, and then by LIDAR analysis initially conducted by Jim Bloomer and subsequently by Myrddyn Phillips. 

LIDAR image of Ynys Fach (SN 668 951)

The criteria for the list that this addition applies to are: 

Y Trechol - The Dominant Hills of Wales - Welsh P30 hills whose prominence  equal or exceed half that of their absolute height.  With the criteria for Lesser Dominant status being those additional Welsh P30 hills whose prominence is between one third and half that of their absolute height.  The list is authored by Myrddyn Phillips with the Introduction to the start of the Mapping Mountains publication of this list appearing on the 3^rd December 2015, and the list is now available inits entirety on Mapping Mountains in Google Doc format. 

Y Trechol - The Dominant Hills of Wales by Myrddyn Phillips

The name the hill is now listed by is Ynys Fach, and it is adjoined to the Pumlumon group of hills which are situated in the north-western part of Mid and West Wales (Region B, Sub-Region B2), and it has the A487 road to its south-east and the town of Machynlleth towards the north-east. 

When the original 30-99m height band of Welsh P30 hills were published on Geoff Crowder’s v-g.me website this hill was included in the Hills to be surveyed sub list that accompanied the main P30 list, as it was considered not to meet the criteria then used in the main P30 category. 

After the sub list was standardised, and interpolated heights and drop values also included the details for this hill were re-evaluated and it was listed with an estimated c 27m of drop based on an estimated c 34m summit height and an estimated c 7m bwlch height, with both values based on interpolation of 10m contouring that appears on the Ordnance Survey 1:25,000 Explorer map. 

Extract from the Ordnance Survey 1:25,000 Explorer map

However, it was not until LIDAR became available that the details for this hill could be accurately re-assessed.  The LIDAR (Light Detection & Ranging) technique produced highly accurate height data that is now freely available for much of England and Wales. 

Therefore, the reclassification of this hill to Dominant status is due to LIDAR analysis, resulting in a 43.5m summit height and a 2.1m bwlch height, with these values giving this hill 41.3m of drop and 95.10% dominance which is sufficient for Ynys Fach to be classified as a Dominant hill. 

 

The full details for the hill are:

Group:  Pumlumon

Name:  Ynys Fach

OS 1:50,000 map:  135

Summit Grid Reference:  SN 66845 95141 (LIDAR)

Summit Height:  43.5m (LIDAR)

Bwlch Grid Reference:  SN 67483 95096 (LIDAR)

Drop Summit to Bwlch:  41.3m (LIDAR)

Drop Bwlch to ODN:  2.1m (LIDAR)

Dominance:  95.10%

 

Myrddyn Phillips (March 2021)

 

 

Mapping Mountains – Hill Reclassifications – 30-99m Twmpau

 

Ynys Fach (SN 668 951) – 30-99m Sub-Twmpau reclassified to 30-99m Twmpau

There has been a reclassification to the list of 30-99m Twmpau, with the summit height, bwlch height and their locations, the drop and status of the hill derived by Joe Nuttall who produced a summit analysis programme using LIDAR, and then by LIDAR analysis initially conducted by Jim Bloomer and subsequently by Myrddyn Phillips. 

LIDAR image of Ynys Fach (SN 668 951)

The criteria for the list that this reclassification applies to are: 

30-99m Twmpau – Welsh hills at or above 30m and below 100m in height that have 30m minimum drop, with an accompanying sub list entitled the 30-99m Sub-Twmpau with the criteria for this sub category being all Welsh hills at or above 30m and below 100m in height with 20m or more and below 30m of drop, with the word Twmpau being an acronym standing for thirty welsh metre prominences and upward. 

The 30-99m Twmpau by Myrddyn Phillips

The name the hill is now listed by is Ynys Fach, and it is adjoined to the Pumlumon group of hills which are situated in the north-western part of Mid and West Wales (Region B, Sub-Region B2), and it has the A487 road to its south-east and the town of Machynlleth towards the north-east. 

When the original 30-99m height band of Welsh P30 hills were published on Geoff Crowder’s v-g.me website this hill was included in the Hills to be surveyed sub list that accompanied the main P30 list, as it was considered not to meet the criteria then used in the main P30 category. 

After the sub list was standardised, and interpolated heights and drop values also included the details for this hill were re-evaluated and it was listed with an estimated c 27m of drop based on an estimated c 34m summit height and an estimated c 7m bwlch height, with both values based on interpolation of 10m contouring that appears on the Ordnance Survey 1:25,000 Explorer map. 

Extract from the Ordnance Survey 1:25,000 Explorer map

However, it was not until LIDAR became available that the details for this hill could be accurately re-assessed.  The LIDAR (Light Detection & Ranging) technique produced highly accurate height data that is now freely available for much of England and Wales. 

Therefore, the reclassification of this hill from 30-99m Sub-Twmpau status is due to LIDAR analysis, resulting in a 43.5m summit height and a 2.1m bwlch height, with these values giving this hill 41.3m of drop, which is sufficient for it to be classified as a 30-99m Twmpau. 

 

The full details for the hill are: 

Group:  Pumlumon 

Name:  Ynys Fach 

OS 1:50,000 map:  135

Summit Height:  43.5m (LIDAR) 

Summit Grid Reference:  SN 66845 95141 (LIDAR) 

Bwlch Height:  2.1m (LIDAR) 

Bwlch Grid Reference:  SN 67483 95096 (LIDAR) 

Drop:  41.3m (LIDAR) 

 

Myrddyn Phillips (March 2021)