Showing posts with label LIDAR data. Show all posts
Showing posts with label LIDAR data. Show all posts

Monday, 10 September 2018

Mapping Mountains – Hill Reclassifications – 30-99m Twmpau


Ynys Gyffylog (SH 629 138) – Double Sub-Twmpau addition

There has been confirmation of an addition to the 30-99m Twmpau list due to LIDAR analysis conducted by Myrddyn Phillips and subsequently confirmed via a survey with the Trimble GeoXH 6000, with the criteria for this list being:

30-99m Twmpau - Welsh hills at or above 30m and below 100m in height with 30m minimum drop, this height band of hills has two accompanying sub lists, the first of which is entitled the 30-99m Sub-Twmpau with the criteria for this sub category being all Welsh hills at or above 30m and below 100m in height with 20m or more and below 30m of drop, and the second sub category which this hill is a part of is entitled the Double Sub-Twmpau with the criteria for this sub category being all Welsh hills at or above 20m and below 30m in height with 20m or more and below 30m of drop, with the word Twmpau being an acronym standing for thirty welsh metre prominences and upward.

This hill did not appear in the accompanying Hills to be surveyed sub list when the original Welsh P30 hills were published on Geoff Crowder’s v-g.me website, as it did not meet the criteria then used for this sub category, however this sub list has now been standardised including the addition of interpolated drop values and interpolated summit heights.

This hill was included as a Double Sub-Twmpau after the Ordnance Survey Interactive Coverage Map became available on the Geograph website, and prior to LIDAR analysis it was listed with an estimated c 20m of drop based on the 23m summit spot height that appears on this map and an estimated bwlch height of c 3m based on interpolation of bwlch contouring between 0 – 10m.

Extract from the Ordnance Survey Interactive Coverage Map hosted on the Geograph website

The name of the hill is Ynys Gyffylog and as its name implies it has association with being an island, or more strictly speaking a tidal estuary island that is now landlocked due to sea defences.  The hill is adjoined to the Cadair Idris group of hills, which are situated in the south-western part of North Wales (Region A, Sub-Region A3), with the hill positioned beside the Arthog Bog and immediately behind a row of terraced houses, and has the Morfa Mawddach Station towards its north-west, the A 493 road to its south and the village of Y Friog (Fairbourne) to its south-west. 

Ynys Gyffylog (SH 629 138)

If wanting to visit the hill permission to do so should be sought as it is not a part of designated open access land, for those wishing to do so it can be a rough experience, especially so in summer as it has copious amounts of undergrowth.

The confirmation of the addition of Ynys Gyffylog to Double Sub-Twmpau status is due to LIDAR analysis conducted by Myrddyn Phillips.  The LIDAR (Light Detection & Ranging) technique produced highly accurate height data that is now freely available for much of England and Wales. 

LIDAR image of Ynys Gyffylog

The 2m DTM LIDAR analysis gives the hill the following details:


Name:  Ynys Gyffylog

Summit Height:  22.9m

Summit Grid Reference:  SH 62965 13851

Bwlch Height:  2.4m

Bwlch Grid Reference:  SH 63071 13758

Drop:  20.4m


Therefore, the 22.9m LIDAR analysis for the summit position at SH 62965 13851 and the 2.4m LIDAR analysis for the bwlch position at SH 63071 13758 gives this hill 20.4m of drop, with the details from the Trimble GeoXH 6000 survey being 23.1m (converted to OSGM15) summit height at SH 62964 13848, and when coupled with the LIDAR bwlch height it gives this hill 20.6m of drop, which confirms its addition to Double Sub-Twmpau status.


Somewhere amongst the undergrowth is the Trimble GeoXH 6000 gathering data at the summit of Ynys Gyffylog 

Group:  Cadair Idris

Name:  Ynys Gyffylog

OS 1:50,000 map:  124

Summit Height:  23.1m (converted to OSGM15)

Summit Grid Reference:  SH 62964 13848

Bwlch Height:  2.4m (LIDAR)

Bwlch Grid Reference:  SH 63071 13758 (LIDAR)

Drop:  20.6m (Trimble summit and LIDAR bwlch)


The Trimble set-up position at the summit of Ynys Gyffylog


Myrddyn Phillips (September 2018)




Saturday, 8 September 2018

Mapping Mountains – Hill Reclassifications – Y Trechol – The Dominant Hills of Wales


Ynys Deullyn (SM 844 340) – Dominant addition

There has been confirmation of an addition to the listing of Y Trechol – The Dominant Hills of Wales due to LIDAR analysis conducted by Myrddyn Phillips, with the criteria for this list being:

Y Trechol – The Dominant Hills of Wales - Welsh P30 hills whose prominence equal or exceed half that of their absolute height.

This hill did not appear in the main P30 list or the accompanying Hills to be surveyed sub list when the original Welsh P30 hills were published on Geoff Crowder’s v-g.me website, as it was thought not to have 30m of drop and therefore was not considered for Dominant status.

This hill was included as a P30 and a Dominant hill shortly after the Ordnance Survey Interactive Coverage Map became available on the Geograph website, and prior to LIDAR analysis it was listed with 30m of drop based on the 30m summit spot height that appears on this map.

2m DTM LIDAR image of Ynys Deullyn (SM 844 340)

The name of the hill is Ynys Deullyn and as its name implies it is an island, or more strictly speaking a tidal island that is attached to mainland Wales at low tide.  The hill is adjoined to the Carn Llidi group of hills, which are situated in the south-western part of Mid and West Wales (Region B, Sub-Region B4), with the island being positioned on the northern part of the Pembrokeshire coast, and has the small community of Abercastell towards its west south-west.

If wanting to visit the island permission to do so should be sought as it is not a part of designated open access land, for those wishing to do so caution is advised as the easiest approach will probably necessitate some form of scramble.

The confirmation of the addition of Ynys Deullyn to Dominant status is due to LIDAR analysis conducted by Myrddyn Phillips.  The LIDAR (Light Detection & Ranging) technique produced highly accurate height data that is now freely available for much of England and Wales. 

The 2m DSM LIDAR analysis gives the hill the following details:


Name:  Ynys Deullyn

Summit Height:  32.6m

Summit Grid Reference:  SM 84479 34095

Bwlch Height:  2.1m

Bwlch Grid Reference:  SM 84513 34087

Drop:  30.5m

Dominance:  93.51%


2m DSM LIDAR image of Ynys Deullyn (SM 844 340)

Therefore, the 32.6m LIDAR analysis for the summit position at SM 84479 34095 and the 2.1m LIDAR analysis for the bwlch position at SM 84513 34087 gives this hill 30.5m of drop and 93.51% dominance, which is sufficient for Dominant status.


The full details for the hill are:

Group:  Carn Llidi

Name:  Ynys Deullyn

Dominance:  93.51% (LIDAR)

OS 1:50,000 map:  157

Summit Grid Reference:  SM 84479 34095 (LIDAR)

Summit Height:  32.6m (LIDAR)

Bwlch Grid Reference:  SM 84513 34087 (LIDAR)

Drop Summit to Bwlch:  30.5m (LIDAR)

Drop Bwlch to ODN:  2.1m (LIDAR)


Myrddyn Phillips (September 2018)



Tuesday, 4 September 2018

Mapping Mountains – Hill Reclassifications – 30-99m Twmpau


Ynys Deullyn (SM 844 340) – 30-99m Twmpau addition

There has been confirmation of an addition to the 30-99m Twmpau list due to LIDAR analysis conducted by Myrddyn Phillips, with the criteria for this list being:

30-99m Twmpau - Welsh hills at or above 30m and below 100m in height with 30m minimum drop, with an accompanying sub list entitled the 30-99m Sub-Twmpau with the criteria for this sub category being all Welsh hills at or above 30m and below 100m in height with 20m or more and below 30m of drop, with the word Twmpau being an acronym standing for thirty welsh metre prominences and upward.

This hill did not appear in the main P30 list or the accompanying Hills to be surveyed sub list when the original Welsh P30 hills were published on Geoff Crowder’s v-g.me website, as it was thought not to have 30m of drop and did not meet the criteria then used for the sub category; however this sub list has now been standardised including the addition of interpolated drop values and heights.

This hill was included as a P30 shortly after the Ordnance Survey Interactive Coverage Map became available on the Geograph website, and prior to LIDAR analysis it was listed with 30m of drop based on the 30m summit spot height that appears on this map.

2m DTM LIDAR image of Ynys Deullyn (SM 844 340)

The name of the hill is Ynys Deullyn and as its name implies it is an island, or more strictly speaking a tidal island that is attached to mainland Wales at low tide.  The hill is adjoined to the Carn Llidi group of hills, which are situated in the south-western part of Mid and West Wales (Region B, Sub-Region B4), with the island being positioned on the northern part of the Pembrokeshire coast, and has the small community of Abercastell towards its west south-west.

If wanting to visit the island permission to do so should be sought as it is not a part of designated open access land, for those wishing to do so caution is advised as the easiest approach will probably necessitate some form of scramble.

The confirmation of the addition of Ynys Deullyn to 30-99m Twmpau status is due to LIDAR analysis conducted by Myrddyn Phillips.  The LIDAR (Light Detection & Ranging) technique produced highly accurate height data that is now freely available for much of England and Wales. 

The 2m DSM LIDAR analysis gives the hill the following details:


Name:  Ynys Deullyn

Summit Height:  32.6m

Summit Grid Reference:  SM 84479 34095

Bwlch Height:  2.1m

Bwlch Grid Reference:  SM 84513 34087

Drop:  30.5m

 
2m DSM LIDAR image of Ynys Deullyn (SM 844 340)

Therefore, the 32.6m LIDAR analysis for the summit position at SM 84479 34095 and the 2.1m LIDAR analysis for the bwlch position at SM 84513 34087 gives this hill 30.5m of drop, which is sufficient for 30-99m Twmpau status.


The full details for the hill are:

Group:  Carn Llidi

Name:  Ynys Deullyn

OS 1:50,000 map:  157

Summit Height:  32.6m (LIDAR)

Summit Grid Reference:  SM 84479 34095 (LIDAR)

Bwlch Height:  2.1m (LIDAR)

Bwlch Grid Reference:  SM 84513 34087 (LIDAR)

Drop:  30.5m (LIDAR)


Myrddyn Phillips (September 2018)





Wednesday, 29 August 2018

Mapping Mountains – Hill Reclassifications – Y Trechol – The Dominant Hills of Wales


Gewni (SM 796 236) – Dominant addition

There has been confirmation of an addition to the listing of Y Trechol – The Dominant Hills of Wales due to LIDAR analysis conducted by Myrddyn Phillips, with the criteria for this list being:

Y Trechol – The Dominant Hills of Wales - Welsh P30 hills whose prominence equal or exceed half that of their absolute height.

This hill did not appear in the main P30 list or the accompanying Hills to be surveyed sub list when the original Welsh P30 hills were published on Geoff Crowder’s v-g.me website, as it was thought not to have 30m of drop and therefore was not considered for Dominant status.

Gewni (SM 796 236)

This hill was included as a P30 and a Dominant hill shortly after the Ordnance Survey Interactive Coverage Map became available on the Geograph website, and prior to LIDAR analysis it was listed with 35m of drop based on the 35m summit spot height that appears on this map.

The name of the hill is Gewni and it is a tidal island that is attached to mainland Wales at low tide.  The hill is adjoined to the Carn Llidi group of hills, which are situated in the south-western part of Mid and West Wales (Region B, Sub-Region B4), with the island being positioned to the west of where the Afon Solfach (River Solva) enters the sea, and has the village of Solfach (Solva) towards its north-east.

If wanting to visit the hill it is a part of designated open access land, for those wishing to do so caution is advised as the easiest approach will probably necessitate some form of scramble.

The confirmation of the addition of Gewni to Dominant status is due to LIDAR analysis conducted by Myrddyn Phillips.  The LIDAR (Light Detection & Ranging) technique produced highly accurate height data that is now freely available for much of England and Wales. 

The 1m DTM LIDAR analysis gives the hill the following details:


Name:  Gewni

Summit Height:  35.7m

Summit Grid Reference:  SM 79696 23606

Bwlch Height:  0.3m

Bwlch Grid Reference:  SM 79689 23698

Drop:  35.3m

Dominance:  99.11%


LIDAR image of Gewni

Therefore, the 35.65m LIDAR analysis for the summit position at SM 79696 23606 and the 0.3m LIDAR analysis for the bwlch position at SM 79689 23698 gives this hill 35.3m of drop and 99.11% dominance, which is sufficient for Dominant status.


The full details for the hill are:

Group:  Carn Llidi

Name:  Gewni

Dominance:  99.11% (LIDAR)

OS 1:50,000 map:  157

Summit Grid Reference:  SM 79696 23606 (LIDAR)

Summit Height:  35.7m (LIDAR)

Bwlch Grid Reference:  SM 79689 23698 (LIDAR)

Drop Summit to Bwlch:  35.3m (LIDAR)

Drop Bwlch to ODN:  0.3m (LIDAR)


Myrddyn Phillips (August 2018)






Friday, 24 August 2018

Mapping Mountains – Hill Reclassifications – 30-99m Twmpau


Gewni (SM 796 236) – 30-99m Twmpau addition

There has been confirmation of an addition to the 30-99m Twmpau list due to LIDAR analysis conducted by Myrddyn Phillips, with the criteria for this list being:

30-99m Twmpau - Welsh hills at or above 30m and below 100m in height with 30m minimum drop, with an accompanying sub list entitled the 30-99m Sub-Twmpau with the criteria for this sub category being all Welsh hills at or above 30m and below 100m in height with 20m or more and below 30m of drop, with the word Twmpau being an acronym standing for thirty welsh metre prominences and upward.

This hill did not appear in the main P30 list or the accompanying Hills to be surveyed sub list when the original Welsh P30 hills were published on Geoff Crowder’s v-g.me website as it was thought not to have 30m of drop and did not meet the criteria then used for the sub category; however this sub list has now been standardised including the addition of interpolated drop values and heights.

This hill was included as a P30 shortly after the Ordnance Survey Interactive Coverage Map became available on the Geograph website, and prior to LIDAR analysis it was listed with 35m of drop based on the 35m summit spot height that appears on this map.

The name of the hill is Gewni and it is a tidal island that is attached to mainland Wales at low tide.  The hill is adjoined to the Carn Llidi group of hills, which are situated in the south-western part of Mid and West Wales (Region B, Sub-Region B4), with the island being positioned to the west of where the Afon Solfach (River Solva) enters the sea, and has the village of Solfach (Solva) towards its north-east.

Gewni (SM 796 236)

If wanting to visit the hill it is a part of designated open access land, for those wishing to do so caution is advised as the easiest approach will probably necessitate some form of scramble.

The confirmation of the addition of Gewni to 30-99m Twmpau status is due to LIDAR analysis conducted by Myrddyn Phillips.  The LIDAR (Light Detection & Ranging) technique produced highly accurate height data that is now freely available for much of England and Wales. 

The 1m DTM LIDAR analysis gives the hill the following details:


Name:  Gewni

Summit Height:  35.7m

Summit Grid Reference:  SM 79696 23606

Bwlch Height:  0.3m

Bwlch Grid Reference:  SM 79689 23698

Drop:  35.3m


LIDAR image of Gewni

Therefore, the 35.65m LIDAR analysis for the summit position at SM 79696 23606 and the 0.3m LIDAR analysis for the bwlch position at SM 79689 23698 gives this hill 35.3m of drop, which is sufficient for 30-99m Twmpau status.


The full details for the hill are:

Group:  Carn Llidi

Name:  Gewni

OS 1:50,000 map:  157

Summit Height:  35.7m (LIDAR)

Summit Grid Reference:  SM 79696 23606 (LIDAR)

Bwlch Height:  0.3m (LIDAR)

Bwlch Grid Reference:  SM 79689 23698 (LIDAR)

Drop:  35.3m (LIDAR)


Myrddyn Phillips (August 2018)





Tuesday, 14 August 2018

Mapping Mountains – Hill Reclassifications – Y Trechol – The Dominant Hills of Wales


Pen Twmp (SM 988 329) – Lesser Dominant reclassified to Dominant

There has been a reclassification to the listing of Y Trechol – The Dominant Hills of Wales due to LIDAR analysis conducted by Myrddyn Phillips, with the criteria for this list being:

Y Trechol – The Dominant Hills of Wales - Welsh P30 hills whose prominence equal or exceed half that of their absolute height.  With an accompanying sub list entitled Y Trechol - The Lesser Dominant Hills of Wales, with the criteria for this sub category being those additional Welsh P30 hills whose prominence is 33% or more and below 50% of their absolute height.

This hill was initially listed as a Dominant hill based on interpolation of bwlch contours and later reclassified to Lesser Dominant status based on the 109m spot height that appears on the area of this hill’s bwlch on the Ordnance Survey Interactive Coverage Map hosted on the Geograph website.

Extract from the Ordnance Survey Interactive Coverage Map hosted on the Geograph website

A locally known name of the hill is Pen Twmp and it is adjoined to the Mynydd Preseli group of hills, which are situated in the south-western part of Mid and West Wales (Region B, Sub-Region B4).  The hill is positioned with the A 40 road to its west and the B 4313 road to its north and has the Nant y Bugail to its south-west and the River Aer to its north-north-east, and has the town of Abergwaun (Fishguard) towards the north-west.

If wanting to visit the hill permission to do so should be sought as it is not a part of designated open access land, for those wishing to do so a public footpath passes to the west of the summit and can be accessed from either the north or south-west.

The reclassification of Pen Twmp to Dominant status is due to LIDAR bwlch analysis conducted by Myrddyn Phillips.  The LIDAR (Light Detection & Ranging) technique produced highly accurate height data that is now freely available for much of England and Wales.


The 2m DTM LIDAR analysis gives the hill the following details:

Name:  Pen Twmp

Summit Height:  217m

Summit Grid Reference:  SM 98820 32984

Bwlch Height:  108.3m

Bwlch Grid Reference:  SM 99284 32968

Drop:  109m

Dominance:  50.09%


LIDAR image of Pen Twmp

LIDAR image of the bwlch of Pen Twmp

Therefore, the 217m summit spot height and the 108.3m LIDAR analysis for the bwlch position at SM 99284 32968 gives this hill 109m of drop and 50.09% Dominance, which is sufficient for it to be reclassified to a Dominant hill.


The full details for the hill are:

Group:  Mynydd Preseli

Name:  Pen Twmp

Dominance:  50.09%

OS 1:50,000 map:  157

Summit Grid Reference:  SM 98820 32984

Summit Height:  217m

Drop Summit to Bwlch:  109m

Drop Bwlch to ODN:  108.3m


Myrddyn Phillips (August 2018)