Friday 18 March 2022

Mapping Mountains – Significant Height Revisions – 200m Twmpau and Y Trechol – The Dominant Hills of Wales


Fan (SN 672 315)

There has been a Significant Height Revision to a hill that is listed in the 200m Twmpau and Y Trechol – The Dominant Hills of Wales, with the summit height, bwlch height and their locations, the drop, dominance and status of the hill derived from LIDAR analysis conducted by Myrddyn Phillips. 

LIDAR image of Fan (SN 672 315)

The criteria for the two listings this height revision affects are: 

200m Twmpau – Welsh hills at or above 200m and below 300m in height that have 30m minimum drop, with an accompanying sub list entitled the 200m Sub-Twmpau with the criteria for this sub category being all Welsh hills at or above 200m and below 300m in height with 20m or more and below 30m of drop, with the word Twmpau being an acronym standing for thirty welsh metre prominences and upward. 

The 200m Twmpau by Myrddyn Phillips

Y Trechol – The Dominant Hills of Wales – Welsh P30 hills whose prominence equal or exceed half that of their absolute height.  With the criteria for Lesser Dominant status being those additional Welsh P30 hills whose prominence is between one third and half that of their absolute height.  The list is authored by Myrddyn Phillips with the Introduction to the start of the Mapping Mountains publication of this list appearing on the 3rd December 2015, and the list is now available in its entirety on Mapping Mountains in Google Doc format. 

Y Trechol - The Dominant Hills of Wales by Myrddyn Phillips

The name the hill is listed by is Fan, and it is adjoined to the Mynydd Mallaen group of hills, which are situated in the central part of South Wales (Region B, Sub-Region B1), and it is positioned with minor roads to its north-west, north-east and south and the B4302 road to the south-west, and has the village of Llanwrda towards the east. 

When the original Welsh 200m P30 list was published on Geoff Crowder’s v-g.me website, this hill was listed with a 265m summit height, based on the spot height adjoined to a triangulation pillar that appears on the Ordnance Survey 1:50,000 Landranger and 1:25,000 Explorer map and which is positioned at SN 67516 31466. 

Extract from the Ordnance Survey 1:25,000 Explorer map

Since the original publication of the Welsh P30 lists on Geoff Crowder’s v-g.me website there have been a number of maps made available online.  Some of these are historic such as the series of Six-Inch maps on the National Library of Scotland website.  Whilst others were digitally updated such as the Ordnance Survey Vector Map Local that was hosted on the Geograph website and which was entitled the Interactive Coverage Map, whilst others are current and digitally updated such as the interactive mapping on the Magic Maps and WalkLakes websites. 

The details for this hill were re-assessed when the Ordnance Survey Vector Map Local hosted on the Geograph website and which was entitled the Interactive Coverage Map became available online.  This mapping had many spot heights not on other publicly available Ordnance Survey maps and for this hill it had a 267m summit spot height positioned at SN 67222 31598. 

Another of the mapping resources now available online is the Magic Maps website which hosts an interactive map originated from Ordnance Survey data.  This mapping also shows a 267m spot height in the same vicinity as the spot height on the Interactive Coverage Map. 

Extract from the Magic Maps website

However, it was not until LIDAR became available that the details for this hill could be accurately re-assessed.  The LIDAR (Light Detection & Ranging) technique produced highly accurate height data that is now freely available for much of England and Wales. 

LIDAR summit image of Fan (SN 672 315)

The summit height produced by LIDAR analysis is 268.7m and this comes within the parameters of the Significant Height Revisions used within this page heading, these parameters are: 

The term Significant Height Revisions applies to any listed hill whose interpolated height and Ordnance Survey or Harvey map summit spot height has a 2m or more discrepancy when compared to the survey result produced by the Trimble GeoXH 6000 or analysis of data produced via LIDAR, also included are hills whose summit map data is missing an uppermost ring contour when compared to the data produced by the Trimble or by LIDAR analysis. 

Therefore, the new listed summit height of this hill is 268.7m and this was derived from LIDAR analysis, this is 3.7m higher than the originally listed summit height of 265m which appears as a spot height adjoined to a triangulation pillar that appears on the Ordnance Survey 1:50,000 Landranger and 1:25,000 Explorer map. 

 

The full details for the hill are: 

Group:  Mynydd Mallaen 

Name:  Fan 

OS 1:50,000 map:  146

Summit Height (New Height):  268.7m (LIDAR) 

Summit Grid Reference:  SN 67223 31597 (LIDAR) 

Bwlch Height:  175.4m (LIDAR) 

Bwlch Grid Reference:  SN 67061 31937 (LIDAR) 

Drop:  93.3m (LIDAR) 

Dominance:  34.71% 

 

Myrddyn Phillips (March 2022)

  

1 comment:

David said...


Very nice blog post. I like this site. Continue the good work! It is exciting to read it and, use it. Thanks for the article. Feel free to visit my website,you can also love this Names that Mean Mountain Blog.