Craig Rofft (SH 776 831) – 100m Sub-Twmpau deletion
There has been a deletion from the list of 100m Twmpau, with the summit height, bwlch height and their locations, the drop and status of the hill derived from LIDAR analysis conducted by Myrddyn Phillips.
LIDAR image of Craig Rofft (SH 776 831) |
The criteria for the list that this deletion applies
to are:
100m Twmpau
– Welsh hills at or above
100m and below 200m in height that have 30m minimum drop, with an accompanying sub list entitled the 100m
Sub-Twmpau with the criteria for this sub category being all Welsh hills at or
above 100m and below 200m in height with 20m or more and below 30m of drop,
with the word Twmpau being an acronym standing for thirty welsh metre prominences and upward.
100m Twmpau by Myrddyn Phillips |
The name the hill is now listed by is Craig Rofft and
this was derived from the Ordnance Survey series of Six-Inch maps, and it is adjoined
to the Mynydd Hiraethog group of hills, which are situated in the northern part of North Wales (Region A,
Sub-Region A2), and it is positioned encircled
by minor roads, and has the town of Llandudno towards the south-east.
When the original 100m height band of Welsh P30 hills were published on Geoff Crowder’s v-g.me website, this hill was not
included in the Hills to be surveyed
sub list, as it was considered not to meet the criteria then used for this sub
category.
After the sub list was standardised, and
interpolated heights and drop values also included the details for this hill
were re-assessed and it was listed with an estimated c 20m of drop, based on the
168m summit spot height that appears on the Ordnance Survey 1:25,000 Explorer
map and an estimated c 148m bwlch height, based on interpolation of 5m
contouring that appeared on the Ordnance Survey Vector Map Local hosted on the
Geograph website and which was entitled the Interactive Coverage Map.
Extract from the Ordnance Survey 1:25,000 Explorer map |
However, it was not until LIDAR became available
that the details for this hill could be accurately re-assessed. The LIDAR (Light Detection & Ranging)
technique produced highly accurate height data that is now freely available for
much of England and Wales.
Therefore, the deletion of this hill from 100m
Sub-Twmpau status is due to LIDAR analysis, resulting in a 167.6m summit height
and a 147.9m bwlch height, with these values giving this hill 19.7m of drop,
which is insufficient for it to be classified as a 100m Sub-Twmpau.
The full details for the hill are:
Group: Mynydd Hiraethog
Name: Craig Rofft
OS 1:50,000 map: 115
Summit Height: 167.6m (LIDAR)
Summit Grid Reference: SH 77614 83198 (LIDAR)
Bwlch Height: 147.9m (LIDAR)
Bwlch Grid Reference: SH 77400 83151 (LIDAR)
Drop: 19.7m (LIDAR)
Myrddyn Phillips (June
2024)
No comments:
Post a Comment