Y Faerdre (SH 784 795)
There has been a Significant Name Change to a hill that was listed in The Welsh P15s, with the summit height, bwlch height and their locations, the drop and status of the hill derived from LIDAR analysis conducted by Myrddyn Phillips.
LIDAR image of Y Faerdre (SH 784 795) |
The criteria for the list that this name change was
applicable to are:
The Welsh
P15s – Welsh hills with 15m
minimum drop, irrespective of their height, with an accompanying sub list entitled the Welsh Sub-P15s,
with the criteria for this sub category being all Welsh hills with 14m or more
and below 15m of drop. The list is authored by Myrddyn Phillips, with the
Introduction to the list appearing on Mapping Mountains on the 10th
May 2019.
The Welsh P15s by Myrddyn Phillips |
The hill is adjoined to the Mynydd Hiraethog group
of hills, which are situated in the northern
part of North Wales (Region A, Sub-Region A2), and it is positioned with the A546 road to its west
and the B5115 road and the A470 road to its east, and has the town of Llandudno
towards the south-east.
When the listing that became known as The Welsh P15s was being compiled, this
hill was included in the P14 sub list under the name of The Vardre with an estimated c 14m of drop, based on an estimated c
97m summit height and an estimated c 83m bwlch height, with both heights based
on interpolation of 5m contouring.
Extract from the Ordnance Survey 1:25,000 Explorer map |
However, it was not until LIDAR became available
that the numerical details for this hill could be accurately re-assessed. The LIDAR (Light Detection & Ranging)
technique produced highly accurate height data that is now freely available for
much of England and Wales.
LIDAR analysis gives the summit of this hill as 93.2m
and with an 81.1m bwlch height, these values give this hill 12.2m of drop,
which is insufficient for it to be classified as a Welsh P15.
As the summit of this hill comprises bounded land
the details for it were examined on the Tithe map. The
term Tithe map is generally given to a map of a Welsh or English parish or
township and which was prepared after the 1836 Tithe Commutation Act. This act allowed tithes to be paid in cash
rather than goods. The Tithe maps gave
names of owners and occupiers of land in each parish and importantly for
place-name research they also included the name of enclosed land. This enclosed land is usually based on a
field system, however not every field is given a name, but many are and
especially so in Wales.
Extract from the Tithe map |
The enclosed land where the summit of this hill is
situated is given the number 187 on the Tithe map, this can be cross referenced
against the apportionments; it is these apportionments that give the name of
the owner or occupier of the land as well as the name of the land. The land where the summit of this hill is
situated is named as Vaerdref in the
apportionments, with the details on the Tithe map appearing
in the parish of Eglwys Rhos and with no county named.
Extract from the apportionments |
Since the original publication of the Welsh P30
lists on Geoff Crowder’s v-g.me website there have been a number of maps made
available online. Some of these are
historic such as the series of Six-Inch maps on the National Library of
Scotland website. Whilst others were
digitally updated such as the Ordnance Survey Vector Map Local that was hosted
on the Geograph website and which was entitled the Interactive Coverage Map,
whilst others are current and digitally updated such as the interactive mapping
on the Magic Maps and WalkLakes websites.
One
of the historic maps now available online is the Ordnance Survey Draft
Surveyors map which formed the basis for the first publicly available Ordnance
Survey One-Inch ‘Old Series’ map, and it is the Draft Surveyors map in conjunction
with the Tithe map, with the prioritised language protocol also being used, that
has prompted the change in the listed name of this hill.
The Draft Surveyors maps
consist of the preliminary drawings made by the Ordnance Survey surveyors
between the 1780s and 1840 and formed the basis for the first publicly
available One-Inch map. They were drawn
at scales of six inches to the mile for areas considered of particular military
significance and down to two inches to the mile for other areas. Fair copies were then produced from these
preliminary drawings to one inch to the mile and then copper plates were
prepared for printing. The Draft
Surveyors maps for the whole of Wales are now available online and they form an
important part in the study of Welsh upland place-names as they bridge the time
frame between the late 18th century and the mid-19th
century when the Ordnance Survey produced their first One-Inch maps, and
importantly for this hill and its listed name, it is this map that uses the
name of Castell Deganwy or Y Faerdre for the land taking in the summit of this
hill.
Extract from the Ordnance Survey Draft Surveyors Map |
The intricacies of language and prioritising one
in favour of another for listing a hill is fraught with complication, with
originating Cymraeg names being anglicised and also originating English names
being cymricised, examples such as these are more common in border country and
especially so for anglicised forms.
There is no steadfast rule that fits all, but as a standard a name that
has its origins in the Welsh language and where this is substantiated by either
historic documentation and/or contemporary usage should be prioritised in
favour of a contemporary anglicised or English version of the name. Likewise, if a name exists where an element
of it is in English and if this name applies to a hill that is situated in a
Welsh speaking part of Wales it is standard practice to use a full Welsh term
for the name. It is also standard
practice to use a Welsh name for a hill if another name exists that has
originated in a different language.
Therefore, the name this hill is now listed by is Y
Faerdre, and this was
derived from the
Ordnance Survey Draft Surveyors map in conjunction with the Tithe map, with the
prioritised language protocol also being used.
The full details for the hill are:
Group: Mynydd Hiraethog
Name: Y Faerdre
Previously Listed Name: The Vardre
OS 1:50,000 map: 115
Summit Height: 93.2m (LIDAR)
Summit Grid Reference: SH 78472 79515 (LIDAR)
Bwlch Height: 81.1m (LIDAR)
Bwlch Grid Reference: SH 78520 79419 (LIDAR)
Drop: 12.2m (LIDAR)
Myrddyn Phillips
(November 2024)
No comments:
Post a Comment