Chwarel Penrhyn (SH 621 658)
There has been a Significant Name Change to a hill that is listed in the 200m Twmpau, with the summit height, bwlch height and their locations, the drop and status of the hill derived from LIDAR analysis conducted by Myrddyn Phillips.
![]() |
| LIDAR image of Chwarel Penrhyn (SH 621 658) |
The criteria for the list that this name change
applies to are:
200m Twmpau - Welsh hills at or above 200m and below 300m in height that have 30m
minimum drop, with an accompanying sub list entitled the 200m Sub-Twmpau, with
the criteria for this sub category being all Welsh hills at or above 200m and
below 300m in height with 20m or more and below 30m of drop. The list is authored by Myrddyn Phillips, with the word Twmpau being an acronym standing
for thirty welsh metre prominences and upward.
![]() |
| 200m Twmpau by Myrddyn Phillips |
The hill is adjoined to the Glyder Fawr group of
hills, which are situated in the north-western
part of North Wales (Region A, Sub-Region A1), and it is positioned with the B4409 road to its
north, a minor road to its west and the A5 road to its east, and has the town
of Bethesda towards the north-east.
When the original 200m height band of Welsh P30 hills were published on Geoff Crowder’s v-g.me website, this hill was not
included in the accompanying Hills to be
surveyed sub list, as with no significant contours of note on the contemporary
Ordnance Survey 1:25,000 map, it was hard to know whether any hill with
qualifying prominence existed and therefore it was considered not to meet the
criteria then used for this sub category.
![]() |
| Extract from the Ordnance Survey 1:25,000 Explorer map |
However, it was not until LIDAR became available
that the details for this hill could be accurately re-assessed. The LIDAR (Light Detection & Ranging)
technique produced highly accurate height data that is now freely available for
much of England and Wales.
LIDAR analysis gives this hill a 220.6m summit
height and a 197.0m bwlch height, with these values giving this hill 23.6m of
drop and therefore it qualifies for 200m Sub-Twmpau status and was
provisionally listed under the name of Penrhyn Slate Quarry, which is a
prominent name that appears adjacent to the hill on the contemporary Ordnance
Survey 1:25,000 Explorer map.
The intricacies of language and prioritising one
in favour of another for listing a hill is fraught with complication, with
originating Cymraeg names being anglicised and also originating English names
being cymricised, examples such as these are more common in border country and
especially so for anglicised forms.
There is no steadfast rule that fits all, but as a standard a name that
has its origins in the Welsh language and where this is substantiated by either
historic documentation and/or contemporary usage should be prioritised in
favour of a contemporary anglicised or English version of the name. Likewise, if a name exists where an element
of it is in English and if this name applies to a hill that is situated in a
Welsh speaking part of Wales it is standard practice to use a full Welsh term
for the name. It is also standard
practice to use a Welsh name for a hill if another name exists that has
originated in a different language.
Therefore, the name this hill
is now listed by in the 200m Twmpau is
Chwarel Penrhyn, and
this was derived from the Ordnance Survey 1:25,000 Explorer map, with
the language protocol also being used.
The full details for the hill are:
Group: Glyder Fawr
Name: Chwarel Penrhyn
Previously Listed Name:
Penrhyn Slate Quarry
OS 1:50,000 map: 115
Summit Height: 220.6m (LIDAR)
Summit Grid Reference: SH 62149 65875 (LIDAR)
Bwlch Height: 197.0m (LIDAR)
Bwlch Grid Reference: SH 61793 65966 (LIDAR)
Drop: 23.6m (LIDAR)
My thanks to Aled Williams for advice relating to the listed name of this hill
Myrddyn Phillips (March
2026)
%20-%20LIDAR%20summit%201.jpg)

%20-%201%2025000.jpg)
No comments:
Post a Comment