Mapping Mountains – Hill Reclassifications – Y Trichant – The 300m Hills of Wales

Ffridd y Tŷ (SH 962 402) – Sub-Trichant addition

There has been confirmation of an addition to the list of Y Trichant – The 300m Hills of Wales, with the summit height, bwlch height and their locations, the drop and status of the hill derived from LIDAR analysis conducted by Myrddyn Phillips. 

LIDAR image of Ffridd y Tŷ (SH 962 402)

The criteria for the list that this addition applies to are: 

Y Trichant – The 300m Hills of Wales – Welsh hills at or above 300m and below 400m in height that have 30m minimum drop, with an accompanying sub list entitled the Sub-Trichant, with the criteria for this sub category being all Welsh hills at or above 300m and below 400m in height with 20m or more and below 30m of drop.  The list is authored by Myrddyn Phillips, with the Introduction to the list and the renaming of it appearing on Mapping Mountains on the 13^th May 2017. 

Y Trichant - The 300m Hills of Wales by Myrddyn Phillips

The name the hill is listed by is Ffridd y Tŷ and this was derived from the Tithe map, and it is adjoined to the Arenig group of hills, which are situated in the central part of North Wales (Region A, Sub-Region A3), and it is positioned with a minor road to its immediate south-east and the A494 road farther to its south-east, and has the town of Y Bala towards the south-west. 

When the original 300m height band of Welsh P30 hills were published on Geoff Crowder’s v-g.me website this hill was not included in the Hills to be surveyed sub list, as it was considered not to meet the criteria then used for this sub category. 

After the sub list was standardised, and interpolated heights and drop values also included the details for this hill were re-evaluated and it was listed with an estimated c 24m of drop, based on the 369m summit spot height that appears on the Ordnance Survey 1:25,000 Explorer map and an estimated c 345m bwlch height based on interpolation of 10m contouring between 340m – 350m. 

Extract from the Ordnance Survey 1:25,000 Explorer map

However, it was not until LIDAR became available that the details for this hill could be accurately re-assessed.  The LIDAR (Light Detection & Ranging) technique produced highly accurate height data that is now freely available for much of England and Wales. 

Therefore, the confirmation of the addition of this hill to Sub-Trichant status is due to LIDAR analysis, resulting in a 369.5m summit height and a 344.2m bwlch height, with these values giving this hill 25.3m of drop, which is sufficient for it to be classified as a Sub-Trichant. 

 

The full details for the hill are: 

Group:  Arenig 

Name:  Ffridd y Tŷ 

OS 1:50,000 map:  125

Summit Height:  369.5m (LIDAR)                                                           

Summit Grid Reference:  SH 96235 40269 (LIDAR) 

Bwlch Height:  344.2m (LIDAR) 

Bwlch Grid Reference:  SH 96057 40317 (LIDAR) 

Drop:  25.3m (LIDAR) 

 

Myrddyn Phillips (August 2021)