Mapping Mountains – Hill Reclassifications – 100m Twmpau

 

Graig y Barcut (SN 546 027) – 100m Sub-Twmpau reclassified to 100m Twmpau

There has been confirmation of a reclassification to the list of 100m Twmpau, with the summit height, bwlch height and their locations, the drop and status of the hill derived from LIDAR analysis conducted by Myrddyn Phillips. 

LIDAR image of Graig y Barcut (SN 546 027)

The criteria for the list that this reclassification applies to are:

100m Twmpau – Welsh hills at or above 100m and below 200m in height that have 30m minimum drop, with an accompanying sub list entitled the 100m Sub-Twmpau with the criteria for this sub category being all Welsh hills at or above 100m and below 200m in height with 20m or more and below 30m of drop, with the word Twmpau being an acronym standing for thirty welsh metre prominences and upward. 

100m Twmpau by Myrddyn Phillips

The name the hill is now listed by is Graig y Barcut and this was derived from the Tithe map, and it is adjoined to the Mynydd Sylen group of hills, which are situated in the southern part of South Wales (Region B, Sub-Region B5), and it is positioned with minor roads to its north, west and east, and the A4138 road to its south, and has the town of Pontarddulais towards the east.

When the original 100m height band of Welsh P30 hills were published on Geoff Crowder’s v-g.me website, this hill was included in the Hills to be surveyed sub list, as it was considered not to meet the criteria then used for the main P30 list.

When the sub list was standardised, and interpolated heights and drop values also included the details for this hill were re-assessed and it was listed with an estimated c 32m of drop, based on the 104m summit spot height that appears on the Ordnance Survey 1:25,000 Explorer map and an estimated c 72m bwlch height, based on interpolation of 5m contouring between 70m – 75m. 

Extract from the Ordnance Survey 1:25,000 Explorer map

The details for this hill were re-assessed when the Ordnance Survey Vector Map Local hosted on the Geograph website and which was entitled the Interactive Coverage Map became available online.  This mapping had many spot heights not on other publicly available Ordnance Survey maps and for this hill it had a 72m bwlch spot height, and when coupled with the 104m summit spot height, these values gave this hill 32m of drop.

However, it was not until LIDAR became available that the details for this hill could be accurately re-assessed.  The LIDAR (Light Detection & Ranging) technique produced highly accurate height data that is now freely available for much of England and Wales.

Therefore, the confirmation of the reclassification of this hill from 100m Sub-Twmpau status is due to LIDAR analysis, resulting in a 104.0m summit height and a 71.8m bwlch height, with these values giving this hill 32.2m of drop, which is sufficient for it to be classified as a 100m Twmpau. 

 

The full details for the hill are: 

Group:  Mynydd Sylen 

Name:  Graig y Barcut 

OS 1:50,000 map:  159

Summit Height:  104.0m (LIDAR) 

Summit Grid Reference:  SN 54698 02770 (LIDAR) 

Bwlch Height:  71.8m (LIDAR) 

Bwlch Grid Reference:  SN 54693 03117 (LIDAR) 

Drop:  32.2m (LIDAR) 

 

Myrddyn Phillips (October 2024)